INXI(1)

NAME
inxi - Command line system information script for console and IRC

SYNOPSIS
inxi inxi [-AbBCdDfFGhiIlmMnNopPrRsSuUVwzZ] inxi [-c NUMBER] [-t [c|m|cm|mc] [NUMBER]] [-v NUMBER] [-W LOCATION] [--weather-unit {m|i|mi|im}] [-y WIDTH] inxi [--recommends] [--slots] [--usb] inxi -x|-xx|-xxx -OPTION(s) All options have long form variants - see below for these and more advanced options.

DESCRIPTION
inxi is a command line system information script built for console and IRC. It is also used a debugging tool for forum technical support to quickly ascertain users' system configurations and hardware. inxi shows system hardware, CPU, drivers, Xorg, Desktop, Kernel, gcc version(s), Processes, RAM usage, and a wide variety of other useful information. inxi output varies depending on whether it is being used on CLI or IRC, with some default filters and color options applied only for IRC use. Script colors can be turned off if desired with -c 0, or changed using the -c color options listed in the STANDARD OPTIONS section below.

PRIVACY AND SECURITY
In order to maintain basic privacy and security, inxi used on IRC automatically filters out your network card MAC address, WAN and LAN IP, your /home username directory in partitions, and a few other items. Because inxi is often used on forums for support, you can also trigger this filtering with the -z option (-Fz, for example). To override the IRC filter, you can use the -Z option. This can be useful in debugging network connection issues online in a private chat, for example.

USING OPTIONS
Options can be combined if they do not conflict. You can either group the letters together or separate them. Letters with numbers can have no gap or a gap at your discretion, except when using -t. For example: inxi -AG or inxi -A -G or inxi -c10 Note that all the short form options have long form equivalents, which are listed below. However, usually the short form is used in examples in order to keep things simple.

STANDARD OPTIONS

-A, --audio
    Show Audio/sound card(s) information, including card driver.

-b, --basic
    Show basic output, short form. Same as: inxi -v 2

-B, --battery
    Show Battery data, charge, condition, plus extra information (if battery present). Uses /sys or, for BSDs without systctl battery data, dmidecode. dmidecode does not have very much information, and none about current battery state/charge/voltage. Supports multiple batteries when using /sys data. Note that for charge, the output shows the current charge, as well as its value as a percentage of the available capacity, which can be less than the original design capacity. In the following example, the actual current available capacity of the battery is 22.2 Wh. charge: 20.1 Wh 95.4% The condition item shows the remaining available capacity / original design capacity, and then this figure as a percentage of original capacity available in the battery. condition: 22.2/36.4 Wh (61%)

-c, --color [0-42]
    Set color scheme. If no scheme number is supplied, 0 is assumed.

-c [94-99]
    These color selectors run a color selector option prior to inxi starting which lets you set the config file value for the selection. Color selectors for each type display (NOTE: IRC and global only show safe color set):

-c 94
    - Console, out of X.

-c 95
    - Terminal, running in X - like xTerm.

-c 96
    - GUI IRC, running in X - like XChat, Quassel, Konversation etc.

-c 97
    - Console IRC running in X - like irssi in xTerm.

-c 98
    - Console IRC not in X.

-c 99
    - Global - Overrides/removes all settings. Setting a specific color type removes the global color selection.

-C, --cpu
    Show full CPU output, including per CPU clock speed and CPU max speed (if available). If max speed data present, shows (max) in short output formats (inxi, inxi -b) if actual CPU speed matches max CPU speed. If max CPU speed does not match actual CPU speed, shows both actual and max speed information. See -x for more options. For certain CPUs (some ARM, and AMD Zen family) shows CPU die count. The details for each CPU include a technical description e.g. type: MT MCP * MT - Multi/Hyper Threaded CPU, more than 1 thread per core (previously HT). * MCM - Multi Chip Model (more than 1 die per CPU). * MCP - Multi Core Processor (more than 1 core per CPU). * SMP - Symmetric Multi Processing (more than 1 physical CPU). * UP - Uni (single core) Processor.

-d, --disk-full,--optical
    Show optical drive data as well as -D hard drive data. With -x, adds a feature line to the output. Also shows floppy disks if present. Note that there is no current way to get any information about the floppy device that I am aware of, so it will simply show the floppy ID without any extra data. -xx adds a few more features.

-D, --disk
    Show Hard Disk info. Shows total disk space and used percentage. The disk used percentage includes space used by swap partition(s), since those are not usable for data storage. Note that with RAID disks, the percentage will be wrong since the total is computed from the disk sizes, but used is computed from mounted partition used percentages. This small defect may get corrected in the future. Also, unmounted partitions are not counted in disk use percentages since inxi has no access to the used amount. Also shows per disk information: Disk ID, type (if present), vendor (if detected), model, and size. See Extra Data Options for more features.

-f, --flags
    Show all CPU flags used, not just the short list. Not shown with -F in order to avoid spamming. ARM CPUs: show features items.

-F, --full
    Show Full output for inxi. Includes all Upper Case line letters except -W, plus -s and -n. Does not show extra verbose options such as -d -f -i -l -m -o -p -r -t -u -x unless you use those arguments in the command, e.g.: inxi -Frmxx

-G, --graphics
    Show Graphic card(s) information, including details of card and card driver, display protocol (if available), display server (vendor and version number), e.g.: Display: x11 server: Xorg 1.15.1 If protocol is not detected, shows: Display: server: Xorg 1.15.1 Also shows screen resolution(s), OpenGL renderer, OpenGL core profile version/OpenGL version. Compositor information will show if detected using -xx option.

-h, --help
    The help menu. Features dynamic sizing to fit into terminal window. Set script global COLS_MAX_CONSOLE if you want a different default value, or use -y <width> to temporarily override the defaults or actual window width.

-i, --ip
    Show WAN IP address and local interfaces (latter requires ifconfig or ip network tool), as well as network output from -n. Not shown with -F for user security reasons. You shouldn't paste your local/WAN IP. Shows both IPv4 and IPv6 link IP addresses.

-I, --info
    Show Information: processes, uptime, memory, IRC client (or shell type if run in shell, not IRC), inxi version. See -x and -xx for extra information (init type/version, runlevel).

-l, --label
    Show partition labels. Default: main partitions -P. For full -p output, use: -pl.

-m, --memory
    Memory (RAM) data. Does not display with -b or -F unless you use -m explicitly. Ordered by system board physical system memory array(s) (Array-[number]), and individual memory devices (Device-[number]). Physical memory array data shows array capacity, number of devices supported, and Error Correction information. Devices shows locator data (highly variable in syntax), size, speed, type (eg: type: DDR3). Note that -m uses dmidecode, which must be run as root (or start inxi with sudo), unless you figure out how to set up sudo to permit dmidecode to read /dev/mem as user. Note that speed will not show if No Module Installed is found in size. This will also turn off Bus Width data output if it is null. If memory information was found, and if the -I line or the -tm item have not been triggered, will also print the RAM used/total. Because dmidecode data is extremely unreliable, inxi will try to make best guesses. If you see (check) after the capacity number, you should check it with the specifications. (est) is slightly more reliable, but you should still check the real specifications before buying RAM. Unfortunately there is nothing inxi can do to get truly reliable data about the system RAM; maybe one day the kernel devs will put this data into /sys, and make it real data, taken from the actual system, not dmi data. For most people, the data will be right, but a significant percentage of users will have either a wrong max module size, if present, or max capacity.

-M, --machine
    Show machine data. Device, Motherboard, BIOS, and if present, System Builder (Like Lenovo). Older systems/kernels without the required /sys data can use dmidecode instead, run as root. If using dmidecode, may also show BIOS/UEFI revision as well as version. --dmidecode forces use of dmidecode data instead of /sys. Will also attempt to show if the system was booted by BIOS, UEFI, or UEFI [Legacy], the latter being legacy BIOS boot mode in a system board using UEFI. Device information requires either /sys or dmidecode. Note that 'other-vm?' is a type that means it's usually a VM, but inxi failed to detect which type, or positively confirm which VM it is. Primary VM identification is via systemd-detect-virt but fallback tests that should also support some BSDs are used. Less commonly used or harder to detect VMs may not be correctly detected. If you get an incorrect output, post an issue and we'll get it fixed if possible. Due to unreliable vendor data, device type will show: desktop, laptop, notebook, server, blade, plus some obscure stuff that inxi is unlikely to ever run on.

-n, --network-advanced
    Show Advanced Network card information in addition to that produced by -N. Shows interface, speed, MAC ID, state, etc.

-N, --network
    Show Network card(s) information, including card driver. With -x, shows PCI BusID, Port number.

-o, --unmounted
    Show unmounted partition information (includes UUID and LABEL if available). Shows file system type if you have lsblk installed (Linux only). For BSD/GNU Linux: shows file system type if file is installed, and if you are root or if you have added to /etc/sudoers (sudo v. 1.7 or newer): <username> ALL = NOPASSWD: /usr/bin/file (sample) Does not show components (partitions that create the md-raid array) of md-raid arrays.

-p, --partitions-full
    Show full Partition information (-P plus all other detected mounted partitions).

-P, --partitions
    Show basic Partition information. Shows, if detected: / /boot /home /opt /tmp /usr /var /var/tmp /var/log. Use -p to see all mounted partitions.

-r, --repos
    Show distro repository data. Currently supported repo types: APK (Alpine Linux + derived versions) APT (Debian, Ubuntu + derived versions) EOPKG (Solus) PACMAN (Arch Linux, KaOS + derived versions) PACMAN-G2 (Frugalware + derived versions) PISI (Pardus + derived versions) PORTAGE (Gentoo, Sabayon + derived versions) PORTS (OpenBSD, FreeBSD, NetBSD + derived OS types) SLACKPKG (Slackware + derived versions) URPMQ (Mandriva, Mageia + derived versions) YUM/ZYPP (Fedora, Red Hat, Suse + derived versions) More will be added as distro data is collected. If yours is missing please show us how to get this information and we'll try to add it.

-R, --raid
    Show RAID data. Shows RAID devices, states, levels and components, and extra data with -x / -xx. md-raid: If device is resyncing, also shows resync progress line. Note: Only md-raid and ZFS are currently supported. Other software RAID types could be added, but only if users supply all data required, and if the software RAID actually can be made to give the required output.

--recommends
    Checks inxi application dependencies and recommends, as well as directories, then shows what package(s) you need to install to add support for each feature.

-s, --sensors
    Show output from sensors if sensors installed/configured: Motherboard/CPU/GPU temperatures; detected fan speeds. GPU temperature when available. Nvidia shows screen number for multiple screens. IPMI sensors are also used (root required) if present.

--slots
    Show PCI slots with type, speed, and status information.

-S, --system
    Show System information: host name, kernel, desktop environment (if in X), distro. With -xx show dm - or startx - (only shows if present and running if out of X), and if in X, with -xxx show more desktop info, e.g. shell/panel.

-t, --processes
    [c|m|cm|mc NUMBER] Show processes. If no arguments, defaults to cm. If followed by a number, shows that number of processes for each type (default: 5; if in IRC, max: 5) Make sure that there is no space between letters and numbers (e.g. write as -t cm10).

-t c
    - CPU only. With -x, also shows memory for that process on same line.

-t m
    - memory only. With -x, also shows CPU for that process on same line. If the -I line is not triggered, will also show the system RAM used/total information.

-t cm
    - CPU+memory. With -x, shows also CPU or memory for that process on same line.

--usb
    Show USB data for attached Hubs and Devices.

-u, --uuid
    Show partition UUIDs. Default: main partitions -P. For full -p output, use: -pu.

-U, --update
    Note - Maintainer may have disabled this function. If inxi -h has no listing for -U then it's disabled. Auto-update script. Note: if you installed as root, you must be root to update, otherwise user is fine. Also installs / updates this man page to: /usr/local/share/man/man1 (if /usr/local/share/man/ exists AND there is no inxi man page in /usr/share/man/man1, otherwise it goes to /usr/share/man/man1). This requires that you be root to write to that directory. See --man or --no-man to force or disable man install.

-V, --version
    inxi version information. Prints information then exits.

-v, --verbosity
    Script verbosity levels. If no verbosity level number is given, 0 is assumed. Should not be used with -b or -F. Supported levels: 0-8 Examples : inxi -v 4 or inxi -v4

-v 0
    - Short output, same as: inxi

-v 1
    - Basic verbose, -S + basic CPU (cores, type, clock speed, and min/max speeds, if available) + -G + basic Disk + -I.

-v 2
    - Adds networking card (-N), Machine (-M) data, Battery (-B) (if available). Same as: inxi -b

-v 3
    - Adds advanced CPU (-C) and network (-n) data; triggers -x advanced data option.

-v 4
    - Adds partition size/used data (-P) for (if present): / /home /var/ /boot. Shows full disk data (-D)

-v 5
    - Adds audio card (-A), memory/RAM (-m), sensors (-s), partition label (-l), UUID (-u), and short form of optical drives.

-v 6
    - Adds full mounted partition data (-p), unmounted partition data (-o), optical drive data (-d), USB (--usb); triggers -xx extra data option.

-v 7
    - Adds network IP data (-i); triggers -xxx

-v 8
    - All system data available. Adds Repos (-r), PCI slots (--slots), processes (-tcm). Useful for testing output and to see what data you can get from your system.

-w, --weather
    Adds weather line. Note, this depends on an unreliable API so it may not always be working in the future. To get weather for an alternate location, use -W. See also -x, -xx, -xxx options. Please note that your distribution's maintainer may chose to disable this feature.

-W, --weather-location <location_string>
    Get weather/time for an alternate location. Accepts postal/zip code, city,state pair, or latitude,longitude. Note: city/country/state names must not contain spaces. Replace spaces with '+' sign. Don't place spaces around any commas. Use only ASCII letters in city/state/country names, sorry. Examples: -W 95623 OR -W Boston,MA OR -W45.5234,-122.6762 OR -W new+york,ny OR -W bodo,norway.

--weather-unit <unit>
    [m|i|mi|im] Sets weather units to metric (m), imperial (i), metric (imperial) (mi, default), imperial (metric) (im). If metric or imperial not found,sets to default value, or N/A.

-y, --width <integer>
    This is an absolute width override which sets the output line width max. Overrides COLS_MAX_IRC / COLS_MAX_CONSOLE globals, or the actual widths of the terminal. 80 is the minimum width supported. -1 removes width limits. Example: inxi -Fxx -y 130

-z, --filter
    Adds security filters for IP addresses, serial numbers, MAC, location (-w), and user home directory name. On by default for IRC clients.

-Z, --filter-override
    Absolute override for output filters. Useful for debugging networking issues in IRC for example.

EXTRA DATA OPTIONS
These options can be triggered by one or more -x. Alternatively, the -v options trigger them in the following way: -v 3 adds -x; -v 6 adds -xx; -v 7 adds -xxx These extra data triggers can be useful for getting more in-depth data on various options. They can be added to any long form option list, e.g.: -bxx or -Sxxx There are 3 extra data levels: -x, -xx, -xxx OR --extra 1, --extra 2, --extra 3 The following details show which lines / items display extra information for each extra data level.

-x -A
    - Adds version/port(s)/driver version (if available) for each Audio device.

-x -A
    - Adds PCI Bus ID/USB ID number of each Audio device.

-x -B
    - Adds vendor/model, battery status (if battery present).

-x -C
    - Adds bogomips on CPU (if available); CPU Flags (short list).

-x -C
    - Adds CPU microarchitecture + revision (e.g. Sandy Bridge, K8, ARMv8, P6, etc.). Only shows data if detected. Newer microarchitectures will have to be added as they appear, and require the CPU family ID and model ID. Examples: arch: Sandy Bridge rev: 2, arch: K8 rev.F+ rev: 2

-x -d
    - Adds more items to Features line of optical drive; dds rev version to optical drive.

-x -D
    - Adds HDD temperature with disk data if you have hddtemp installed, if you are root or if you have added to /etc/sudoers (sudo v. 1.7 or newer): <username> ALL = NOPASSWD: /usr/sbin/hddtemp (sample)

-x -G
    - Adds direct rendering status.

-x -G
    - Adds (for single GPU, nvidia driver) screen number that GPU is running on.

-x -G
    - Adds PCI Bus ID/USB ID number of each Graphics card.

-x -i
    - Adds IP v6 additional scope data, like Global, Site, Temporary for each interface. Note that there is no way I am aware of to filter out the deprecated IP v6 scope site/global temporary addresses from the output of ifconfig. The ip tool shows that clearly. ip-v6-temporary - (ip tool only), scope global temporary. Scope global temporary deprecated is not shown ip-v6-global - scope global (ifconfig will show this for all types, global, global temporary, and global temporary deprecated, ip shows it only for global) ip-v6-link - scope link (ip/ifconfig) - default for -i. ip-v6-site - scope site (ip/ifconfig). This has been deprecated in IPv6, but still exists. ifconfig may show multiple site values, as with global temporary, and global temporary deprecated. ip-v6-unknown - unknown scope

-x -I
    - Adds current init system (and init rc in some cases, like OpenRC). With -xx, shows init/rc version number, if available.

-x -I
    - Adds default system gcc. With -xx, also show other installed gcc versions.

-x -I
    - Adds current runlevel (not available with all init systems).

-x -I
    - If in shell (i.e. not in IRC client), adds shell version number, if available.

-x -m
    - If present, adds maximum memory module/device size in the Array line. Only some systems will have this data available. Shows estimate if it can generate one.

-x -m
    - Adds device type in the Device line.

-x -N
    - Adds version/port(s)/driver version (if available) for each Network card;

-x -N
    - Adds PCI Bus ID/USB ID number of each Network card.

-x -R
    - md-raid: Adds second RAID Info line with extra data: blocks, chunk size, bitmap (if present). Resync line, shows blocks synced/total blocks.

-x -s
    - Adds basic voltages: 12v, 5v, 3.3v, vbat (ipmi, lm-sensors if present).

-x -S
    - Adds desktop toolkit (tk), if available (GNOME/Xfce/KDE only).

-x -S
    - Kernel gcc version.

-x -t
    - Adds memory use output to CPU (-xt c), and CPU use to memory (-xt m).

-x --usb
    - For Devices, adds USB version/speed.

-x -w, -W
    - Adds humidity and barometric pressure.

-x -w, -W
    - Adds wind speed and direction.

-xx -A
    - Adds vendor:product ID for each Audio device.

-xx -B
    - Adds serial number, voltage (if available). Note that volts shows the data (if available) as the voltage now / minimum design voltage.

-xx -D
    - Adds disk serial number.

-xx -D
    - Adds disk speed (if available). This is the theoretical top speed of the device as reported. This speed may be restricted by system board limits, eg. a SATA 3 drive on a SATA 2 board may report SATA 2 speeds, but this is not completely consistent, sometimes a SATA 3 device on a SATA 2 board reports its design speed. NVMe drives: adds lanes, and (per direction) speed is calculated with lane speed * lanes * PCIe overhead. PCIe 1 and 2 have data rates of GT/s * .8 = Gb/s (10 bits required to transfer 8 bits of data). PCIe 3 and greater transfer data at a rate of GT/s * 128/130 * lanes = Gb/s (130 bits required to transfer 128 bits of data). For a PCIe 3 NVMe drive, with speed of 8 GT/s and 4 lanes (8GT/s * 128/130 * 4 = 31.6 Gb/s): speed: 31.6 Gb/s lanes: 4

-xx -G
    - Adds vendor:product ID of each Graphics card.

-xx -G
    - Adds compositor, if found (experimental).

-xx -G
    - For free drivers, adds OpenGL compatibility version number if available. For nonfree drivers, the core version and compatibility versions are usually the same. Example: v: 3.3 Mesa 11.2.0 compat-v: 3.0

-xx -I
    - Adds init type version number (and rc if present).

-xx -I
    - Adds other detected installed gcc versions (if present).

-xx -I
    - Adds system default runlevel, if detected. Supports Systemd/Upstart/SysVinit type defaults.

-xx -I
    - Adds parent program (or tty) that started shell, if not IRC client.

-xx -m
    - Adds memory device Manufacturer.

-xx -m
    - Adds memory device Part Number (part-no:). Useful for ordering new or replacement memory sticks etc. Part numbers are unique, particularly if you use the word memory in the search as well. With -xxx, also shows serial number.

-xx -m
    - Adds single/double bank memory, if data is found. Note, this may not be 100% right all of the time since it depends on the order that data is found in dmidecode output for type 6 and type 17.

-xx -M
    - Adds chassis information, if data is available. Also shows BIOS ROM size if using dmidecode.

-xx -N
    - Adds vendor:product ID for each Network card.

-xx -R
    - md-raid: Adds superblock (if present) and algorithm. If resync, shows progress bar.

-xx -s
    - Adds DIMM/SOC voltages, if present (ipmi only).

-xx -S
    - Adds, if run in X, display manager (dm) type, if present.q If none, shows N/A. Supports most known display managers, including gdm, gdm3, idm, kdm, lightdm, lxdm, mdm, nodm, sddm, slim, tint, wdm, and xdm.

-xx --slots
    - Adds slot length.

-xx --usb
    - Adds vendor:chip id.

-xx -w, -W
    - Adds wind chill, heat index, and dew point if any of these are available.

-xxx -B
    - Adds battery chemistry (e.g. Li-ion), cycles (NOTE: there appears to be a problem with the Linux kernel obtaining the cycle count, so this almost always shows 0. There's nothing that can be done about this glitch, the data is simply not available as of 2018-04-03), location (only available from dmidecode derived output).

-xxx -D
    - Adds disk firmware revision number (if available).

-xxx -D
    - Adds disk partition scheme (in some but not all cases), e.g. scheme: GPT

-xxx -I
    - For Shell: adds (su|sudo|login) to shell name if present.

-xxx -I
    - For running in: adds (SSH) to parent, if present. SSH detection uses the who am i test.

-xxx -m
    - Adds memory bus width: primary bus width, and if present, total width. e.g. bus width: 64 bit (total: 72 bits). Note that total / data widths are mixed up sometimes in dmidecode output, so inxi will take the larger value as the total if present. If no total width data is found, then inxi will not show that item.

-xxx -m
    - Adds device Type Detail, e.g. detail: DDR3 (Synchronous).

-xxx -m
    - If present, adds memory module voltage. Only some systems will have this data available.

-xxx -m
    - Adds device serial number.

-xxx -R
    - md-raid: Adds system mdraid support types (kernel support, read ahead, RAID events) - zfs-raid: Adds portion allocated (used) by RAID array/device.

-xxx -S
    - Adds, if run in X, shell/panel type (info), if present. If none, shows nothing. Supports some current desktop extras like gnome-panel, lxde-panel, and others. Added mainly for Mint support.

-xxx -S
    - Adds, if run in X, window manager type (wm), if available. Not all window managers are supported. Some desktops support using more than one window manager, so this can be useful to see what windom manager is actually running. If none found, shows nothing.

-xxx -w, -W
    - Adds location (city state country), altitude, weather observation time.

ADVANCED OPTIONS

--alt 40
    Bypass Perl as a downloader option. Priority is: Perl (HTTP::Tiny), Curl, Wget, Fetch, (OpenBSD only) ftp.

--alt 41
    Bypass Curl as a downloader option. Priority is: Perl (HTTP::Tiny), Curl, Wget, Fetch, (OpenBSD only) ftp.

--alt 42
    Bypass Fetch as a downloader option. Priority is: Perl (HTTP::Tiny), Curl, Wget, Fetch, (OpenBSD only) ftp.

--alt 43
    Bypass Wget as a downloader option. Priority is: Perl (HTTP::Tiny), Curl, Wget, Fetch, OpenBSD only: ftp

--alt 44
    Bypass Curl, Fetch, and Wget as downloader options. This basically forces the downloader selection to use Perl 5.x HTTP::Tiny, which is generally slower than Curl or Wget but it may help bypass issues with downloading.

--display [:<integer>]
    Will try to get display data out of X (does not usually work as root user). Default gets display info from display :0. If you use the format --display :1 then it would get it from display 1 instead, or any display you specify. Note that in some cases, --display will cause inxi to hang endlessly when running the option in console with Intel graphics. The situation regarding other free drivers such as nouveau/ATI is currently unknown. It may be that this is a bug with the Intel graphics driver - more information is required. You can test this easily by running the following command out of X/display server: glxinfo -display :0 If it hangs, --display will not work.

--dmidecode
    Force use of dmidecode. This will override /sys data in some lines, e.g. -M or -B.

--downloader [curl|fetch|perl|wget]
    Force inxi to use Curl, Fetch, Perl, or Wget for downloads.

--host
    Turns on hostname in System line. Overrides inxi config file value (if set): SHOW_HOST='false'

--indent-min [integer]
    Overrides default indent minimum value. This is the value that makes inxi change from wrapped line starters [like Info] to non wrapped. If less than 80, no wrapping will occur. Overrides internal default value and user configuration value: INDENT_MIN=85

--limit [-1 - x]
    Raise or lower max output limit of IP addresses for -i. -1 removes limit.

--man
    Updates / installs man page with -U if pinxi or using -U 3 dev branch. (Only active if -U is is not disabled by maintainers).

--no-host
    Turns off hostname in System line. Useful, in combination with -z, for anonymizing inxi output for posting on forums or IRC. Same as configuration value: SHOW_HOST='false'

--no-man
    Disables man page install with -U for master and active development branches. (Only active if -U is is not disabled by maintainers).

--no-ssl
    Skip SSL certificate checks for all downloader actions (-U, -w, -W, -i). Use if your system does not have current SSL certificate lists, or if you have problems making a connection for any reason. Works with Wget, Curl, and Fetch only.

--output [json|screen|xml]
    Change data output type. Requires --output-file if not fBscreen.

--output-file [full path to output file|print]
    The given directory path must exist. The directory path given must exist, The print options prints to stdout. Required for non-screen --output formats (json|xml).

--sleep [0-x.x]
    Usually in decimals. Change CPU sleep time for -C (current: .35). Sleep is used to let the system catch up and show a more accurate CPU use. Example: inxi -Cxxx --sleep 0.15 Overrides default internal value and user configuration value: CPU_SLEEP=0.25

DEBUGGING OPTIONS

--debug [1-3]
    - On screen debugger output (currently not used).

--debug 10
    - Basic logging. Check $XDG_DATA_HOME/inxi/inxi.log or $HOME/.local/share/inxi/inxi.log or $HOME/.inxi/inxi.log.

--debug 11
    - Full file/system info logging.

--debug [20-22]
    Debugger output generator.

--debug 20
    Creates a tar.gz file of system data and collects the inxi output in a file. * tree traversal data file read from /sys, and other system data. * xorg conf and log data, xrandr, xprop, xdpyinfo, glxinfo etc. * data from dev, disks, partitions, etc.

--debug 21
    Automatically uploads debugger data tar.gz file to ftp.techpatterns.com, then removes the debug data directory, but leaves the debug tar.gz file. See --ftp for uploading to alternate locations.

--debug 22
    Automatically uploads debugger data tar.gz file to ftp.techpatterns.com, then removes the debug data directory and the tar.gz file. See --ftp for uploading to alternate locations.

--ftp [ftp.yoursite.com/incoming]
    For alternate ftp upload locations: Example: inxi --ftp ftp.yourserver.com/incoming --debug 21

SUPPORTED IRC CLIENTS
BitchX, Gaim/Pidgin, ircII, Irssi, Konversation, Kopete, KSirc, KVIrc, Weechat, and Xchat. Plus any others that are capable of displaying either built-in or external script output.

RUNNING IN IRC CLIENT
To trigger inxi output in your IRC client, pick the appropriate method from the list below:

XChat, Irssi
    (and many other IRC clients) /exec -o inxi [options] If you don't include the -o, only you will see the output on your local IRC client.

Konversation
    /cmd inxi [options] To run inxi in Konversation as a native script if your distribution or inxi package hasn't already done this for you, create this symbolic link: KDE 4: ln -s /usr/local/bin/inxi /usr/share/kde4/apps/konversation/scripts/inxi KDE 5: ln -s /usr/local/bin/inxi /usr/share/konversation/scripts/inxi If inxi is somewhere else, change the path /usr/local/bin to wherever it is located. If you are using KDE/QT 5, then you may also need to add the following to get the Konversation /inxi command to work: ln -s /usr/share/konversation /usr/share/apps/ Then you can start inxi directly, like this: /inxi [options]

WeeChat
    NEW: /exec -o inxi [options] OLD: /shell -o inxi [options] Newer (2014 and later) WeeChats work pretty much the same now as other console IRC clients, with /exec -o inxi [options]. Newer WeeChats have dropped the -curses part of their program name, i.e.: weechat instead of weechat-curses.

CONFIGURATION FILE
inxi will read its configuration/initialization files in the following order: /etc/inxi.conf contains the default configurations. These can be overridden by user configurations found in one of the following locations (inxi will store its config file using the following precedence: if $XDG_CONFIG_HOME is not empty, it will go there, else if $HOME/.conf/inxi.conf exists, it will go there, and as a last default, the legacy location is used), i.e.: $XDG_CONFIG_HOME/inxi.conf > $HOME/.conf/inxi.conf > $HOME/.inxi/inxi.conf

CONFIGURATION OPTIONS
See the documentation page for more complete information on how to set these up, and for a complete list of options: https://smxi.org/docs/inxi-configuration.htm Here's a brief overview of the basic options you are likely to want to use: COLS_MAX_CONSOLE The max display column width on terminal. COLS_MAX_IRC The max display column width on IRC clients. COLS_MAX_NO_DISPLAY The max display column width in console, out of GUI desktop. CPU_SLEEP Decimal value 0 or more. Default is usually around 0.35 seconds. Time that inxi will 'sleep' before getting CPU speed data, so that it reflects actual system state. DOWNLOADER Sets default inxi downloader: curl, fetch, ftp, perl, wget. See --recommends output for more information on downloaders and Perl downloaders. FILTER_STRING Default <filter>. Any string you prefer to see instead for filtered values. INDENT_MIN The point where the line starter wrapping to its own line happens. Overrides default. See --indent-min. If 80 or less, wrap will never happen. LIMIT Overrides default of 10 IP addresses per IF. This is only of interest to sys admins running servers with many IP addresses. PS_COUNT The default number of items showing per -t type, m or c. Default is 5. SENSORS_CPU_NO In cases of ambiguous temp1/temp2 (inxi can't figure out which is the CPU), forces sensors to use either value 1 or 2 as CPU temperature. See the above configuration page on smxi.org for full info. SEP2_CONSOLE Replaces default key / value separator of ':'. WEATHER_UNIT Values: [c|f|cf|fc]. Same as --weather-unit. It's best to use the -c [94-99] color selector tool to set the following values because it will correctly update the configuration file and remove any invalid or conflicting items, but if you prefer to create your own configuration files, here are the options. All take the integer value from the options available in -c 94-99. CONSOLE_COLOR_SCHEME The color scheme for console output (not in X/Wayland). GLOBAL_COLOR_SCHEME Overrides all other color schemes. IRC_COLOR_SCHEME Desktop X/Wayland IRC CLI color scheme. IRC_CONS_COLOR_SCHEME Out of X/Wayland, IRC CLI color scheme. IRC_X_TERM_COLOR_SCHEME In X/Wayland IRC client terminal color scheme. VIRT_TERM_COLOR_SCHEME Color scheme for virtual terminal output (in X/Wayland).

BUGS
Please report bugs using the following resources. You may be asked to run the inxi debugger tool which will upload a data dump of system files for use in debugging inxi. These data dumps are very important since they provide us with all the real system data inxi uses to parse out its report.

inxi main website/source/wiki, file an issue report:
    https://github.com/smxi/inxi/issues

post on inxi developer forums:
    https://techpatterns.com/forums/forum-32.html

You can also visit
    irc.oftc.net channel: #smxi to post issues.

HOMEPAGE
https://github.com/smxi/inxi https://smxi.org/

AUTHOR AND CONTRIBUTORS TO CODE
inxi is a fork of locsmif's very clever infobash script. Original infobash author and copyright holder: Copyright (C) 2005-2007 Michiel de Boer aka locsmif inxi version: Copyright (C) 2008-18 Harald Hope This man page was originally created by Gordon Spencer (aka aus9) and is maintained by Harald Hope (aka h2 or TechAdmin). Initial CPU logic, konversation version logic, occasional maintenance fixes, and the initial xiin.py tool for /sys parsing (obsolete, but still very much appreciated for all the valuable debugger data it helped generate): Scott Rogers Further fixes (listed as known): Horst Tritremmel <hjt at sidux.com> Steven Barrett (aka: damentz) - USB audio patch; swap percent used patch. Jarett.Stevens - dmidecode -M patch for older systems with no /sys.

SPECIAL THANKS TO THE FOLLOWING
The nice people at irc.oftc.net channels #linux-smokers-club and #smxi, who all really have to be considered to be co-developers because of their non-stop enthusiasm and willingness to provide real-time testing and debugging of inxi development. Siduction forum members, who have helped get some features working by providing a large number of datasets that have revealed possible variations, particularly for the RAM -m option. AntiX users and admins, who have helped greatly with testing and debugging, particularly for the 3.0.0 release. ArcherSeven (Max), Brett Bohnenkamper (aka KittyKatt), and Iotaka, who always manage to find the weirdest or most extreme hardware and setups that help make inxi much more robust. For the vastly underrated skill of output error/glitch catching, Pete Haddow. His patience and focus in going through inxi repeatedly to find errors and inconsistencies is much appreciated. All the inxi package maintainers, distro support people, forum moderators, and in particular, sys admins with their particular issues, which almost always help make inxi better, and any others who contribute ideas, suggestions, and patches. Without a wide range of diverse Linux kernel-based Free Desktop systems to test on, we could never have gotten inxi to be as reliable and solid as it's turning out to be. And of course, a big thanks to locsmif, who figured out a lot of the core methods, logic, and tricks originally used in inxi Gawk/Bash.