//! The `Box<T>` type for heap allocation.
//!
//! [`Box<T>`], casually referred to as a 'box', provides the simplest form of
//! heap allocation in Rust. Boxes provide ownership for this allocation, and
//! drop their contents when they go out of scope. Boxes also ensure that they
//! never allocate more than `isize::MAX` bytes.
//!
//! # Examples
//!
//! Move a value from the stack to the heap by creating a [`Box`]:
//!
//! ```
//! let val: u8 = 5;
//! let boxed: Box<u8> = Box::new(val);
//! ```
//!
//! Move a value from a [`Box`] back to the stack by [dereferencing]:
//!
//! ```
//! let boxed: Box<u8> = Box::new(5);
//! let val: u8 = *boxed;
//! ```
//!
//! Creating a recursive data structure:
//!
//! ```
//! ##[allow(dead_code)]
//! #[derive(Debug)]
//! enum List<T> {
//!     Cons(T, Box<List<T>>),
//!     Nil,
//! }
//!
//! let list: List<i32> = List::Cons(1, Box::new(List::Cons(2, Box::new(List::Nil))));
//! println!("{list:?}");
//! ```
//!
//! This will print `Cons(1, Cons(2, Nil))`.
//!
//! Recursive structures must be boxed, because if the definition of `Cons`
//! looked like this:
//!
//! ```compile_fail,E0072
//! # enum List<T> {
//! Cons(T, List<T>),
//! # }
//! ```
//!
//! It wouldn't work. This is because the size of a `List` depends on how many
//! elements are in the list, and so we don't know how much memory to allocate
//! for a `Cons`. By introducing a [`Box<T>`], which has a defined size, we know how
//! big `Cons` needs to be.
//!
//! # Memory layout
//!
//! For non-zero-sized values, a [`Box`] will use the [`Global`] allocator for
//! its allocation. It is valid to convert both ways between a [`Box`] and a
//! raw pointer allocated with the [`Global`] allocator, given that the
//! [`Layout`] used with the allocator is correct for the type. More precisely,
//! a `value: *mut T` that has been allocated with the [`Global`] allocator
//! with `Layout::for_value(&*value)` may be converted into a box using
//! [`Box::<T>::from_raw(value)`]. Conversely, the memory backing a `value: *mut
//! T` obtained from [`Box::<T>::into_raw`] may be deallocated using the
//! [`Global`] allocator with [`Layout::for_value(&*value)`].
//!
//! For zero-sized values, the `Box` pointer still has to be [valid] for reads
//! and writes and sufficiently aligned. In particular, casting any aligned
//! non-zero integer literal to a raw pointer produces a valid pointer, but a
//! pointer pointing into previously allocated memory that since got freed is
//! not valid. The recommended way to build a Box to a ZST if `Box::new` cannot
//! be used is to use [`ptr::NonNull::dangling`].
//!
//! So long as `T: Sized`, a `Box<T>` is guaranteed to be represented
//! as a single pointer and is also ABI-compatible with C pointers
//! (i.e. the C type `T*`). This means that if you have extern "C"
//! Rust functions that will be called from C, you can define those
//! Rust functions using `Box<T>` types, and use `T*` as corresponding
//! type on the C side. As an example, consider this C header which
//! declares functions that create and destroy some kind of `Foo`
//! value:
//!
//! ```c
//! /* C header */
//!
//! /* Returns ownership to the caller */
//! struct Foo* foo_new(void);
//!
//! /* Takes ownership from the caller; no-op when invoked with null */
//! void foo_delete(struct Foo*);
//! ```
//!
//! These two functions might be implemented in Rust as follows. Here, the
//! `struct Foo*` type from C is translated to `Box<Foo>`, which captures
//! the ownership constraints. Note also that the nullable argument to
//! `foo_delete` is represented in Rust as `Option<Box<Foo>>`, since `Box<Foo>`
//! cannot be null.
//!
//! ```
//! #[repr(C)]
//! pub struct Foo;
//!
//! #[no_mangle]
//! pub extern "C" fn foo_new() -> Box<Foo> {
//!     Box::new(Foo)
//! }
//!
//! #[no_mangle]
//! pub extern "C" fn foo_delete(_: Option<Box<Foo>>) {}
//! ```
//!
//! Even though `Box<T>` has the same representation and C ABI as a C pointer,
//! this does not mean that you can convert an arbitrary `T*` into a `Box<T>`
//! and expect things to work. `Box<T>` values will always be fully aligned,
//! non-null pointers. Moreover, the destructor for `Box<T>` will attempt to
//! free the value with the global allocator. In general, the best practice
//! is to only use `Box<T>` for pointers that originated from the global
//! allocator.
//!
//! **Important.** At least at present, you should avoid using
//! `Box<T>` types for functions that are defined in C but invoked
//! from Rust. In those cases, you should directly mirror the C types
//! as closely as possible. Using types like `Box<T>` where the C
//! definition is just using `T*` can lead to undefined behavior, as
//! described in [rust-lang/unsafe-code-guidelines#198][ucg#198].
//!
//! # Considerations for unsafe code
//!
//! **Warning: This section is not normative and is subject to change, possibly
//! being relaxed in the future! It is a simplified summary of the rules
//! currently implemented in the compiler.**
//!
//! The aliasing rules for `Box<T>` are the same as for `&mut T`. `Box<T>`
//! asserts uniqueness over its content. Using raw pointers derived from a box
//! after that box has been mutated through, moved or borrowed as `&mut T`
//! is not allowed. For more guidance on working with box from unsafe code, see
//! [rust-lang/unsafe-code-guidelines#326][ucg#326].
//!
//! # Editions
//!
//! A special case exists for the implementation of `IntoIterator` for arrays on the Rust 2021
//! edition, as documented [here][array]. Unfortunately, it was later found that a similar
//! workaround should be added for boxed slices, and this was applied in the 2024 edition.
//!
//! Specifically, `IntoIterator` is implemented for `Box<[T]>` on all editions, but specific calls
//! to `into_iter()` for boxed slices will defer to the slice implementation on editions before
//! 2024:
//!
//! ```rust,edition2021
//! // Rust 2015, 2018, and 2021:
//!
//! # #![allow(boxed_slice_into_iter)] // override our `deny(warnings)`
//! let boxed_slice: Box<[i32]> = vec![0; 3].into_boxed_slice();
//!
//! // This creates a slice iterator, producing references to each value.
//! for item in boxed_slice.into_iter().enumerate() {
//!     let (i, x): (usize, &i32) = item;
//!     println!("boxed_slice[{i}] = {x}");
//! }
//!
//! // The `boxed_slice_into_iter` lint suggests this change for future compatibility:
//! for item in boxed_slice.iter().enumerate() {
//!     let (i, x): (usize, &i32) = item;
//!     println!("boxed_slice[{i}] = {x}");
//! }
//!
//! // You can explicitly iterate a boxed slice by value using `IntoIterator::into_iter`
//! for item in IntoIterator::into_iter(boxed_slice).enumerate() {
//!     let (i, x): (usize, i32) = item;
//!     println!("boxed_slice[{i}] = {x}");
//! }
//! ```
//!
//! Similar to the array implementation, this may be modified in the future to remove this override,
//! and it's best to avoid relying on this edition-dependent behavior if you wish to preserve
//! compatibility with future versions of the compiler.
//!
//! [ucg#198]: https://github.com/rust-lang/unsafe-code-guidelines/issues/198
//! [ucg#326]: https://github.com/rust-lang/unsafe-code-guidelines/issues/326
//! [dereferencing]: core::ops::Deref
//! [`Box::<T>::from_raw(value)`]: Box::from_raw
//! [`Global`]: crate::alloc::Global
//! [`Layout`]: crate::alloc::Layout
//! [`Layout::for_value(&*value)`]: crate::alloc::Layout::for_value
//! [valid]: ptr#safety

#![stable(feature = "rust1", since = "1.0.0")]

use core::any::Any;
use core::async_iter::AsyncIterator;
use core::borrow;
#[cfg(not(no_global_oom_handling))]
use core::clone::CloneToUninit;
use core::cmp::Ordering;
use core::error::Error;
use core::fmt;
use core::future::Future;
use core::hash::{Hash, Hasher};
use core::iter::FusedIterator;
use core::marker::Tuple;
use core::marker::Unsize;
use core::mem::{self, SizedTypeProperties};
use core::ops::{AsyncFn, AsyncFnMut, AsyncFnOnce};
use core::ops::{
    CoerceUnsized, Coroutine, CoroutineState, Deref, DerefMut, DerefPure, DispatchFromDyn, Receiver,
};
use core::pin::Pin;
use core::ptr::{self, addr_of_mut, NonNull, Unique};
use core::slice;
use core::task::{Context, Poll};

#[cfg(not(no_global_oom_handling))]
use crate::alloc::handle_alloc_error;
use crate::alloc::{AllocError, Allocator, Global, Layout};
#[cfg(not(no_global_oom_handling))]
use crate::borrow::Cow;
use crate::raw_vec::RawVec;
#[cfg(not(no_global_oom_handling))]
use crate::str::from_boxed_utf8_unchecked;
#[cfg(not(no_global_oom_handling))]
use crate::string::String;
use crate::vec;
#[cfg(not(no_global_oom_handling))]
use crate::vec::Vec;

#[unstable(feature = "thin_box", issue = "92791")]
pub use thin::ThinBox;

mod thin;

/// A pointer type that uniquely owns a heap allocation of type `T`.
///
/// See the [module-level documentation](../../std/boxed/index.html) for more.
#[lang = "owned_box"]
#[fundamental]
#[stable(feature = "rust1", since = "1.0.0")]
// The declaration of the `Box` struct must be kept in sync with the
// compiler or ICEs will happen.
pub struct Box<
    T: ?Sized,
    #[unstable(feature = "allocator_api", issue = "32838")] A: Allocator = Global,
>(Unique<T>, A);

impl<T> Box<T> {
    /// Allocates memory on the heap and then places `x` into it.
    ///
    /// This doesn't actually allocate if `T` is zero-sized.
    ///
    /// # Examples
    ///
    /// ```
    /// let five = Box::new(5);
    /// ```
    #[cfg(not(no_global_oom_handling))]
    #[inline(always)]
    #[stable(feature = "rust1", since = "1.0.0")]
    #[must_use]
    #[rustc_diagnostic_item = "box_new"]
    pub fn new(x: T) -> Self {
        #[rustc_box]
        Box::new(x)
    }

    /// Constructs a new box with uninitialized contents.
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(new_uninit)]
    ///
    /// let mut five = Box::<u32>::new_uninit();
    ///
    /// let five = unsafe {
    ///     // Deferred initialization:
    ///     five.as_mut_ptr().write(5);
    ///
    ///     five.assume_init()
    /// };
    ///
    /// assert_eq!(*five, 5)
    /// ```
    #[cfg(not(no_global_oom_handling))]
    #[unstable(feature = "new_uninit", issue = "63291")]
    #[must_use]
    #[inline]
    pub fn new_uninit() -> Box<mem::MaybeUninit<T>> {
        Self::new_uninit_in(Global)
    }

    /// Constructs a new `Box` with uninitialized contents, with the memory
    /// being filled with `0` bytes.
    ///
    /// See [`MaybeUninit::zeroed`][zeroed] for examples of correct and incorrect usage
    /// of this method.
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(new_uninit)]
    ///
    /// let zero = Box::<u32>::new_zeroed();
    /// let zero = unsafe { zero.assume_init() };
    ///
    /// assert_eq!(*zero, 0)
    /// ```
    ///
    /// [zeroed]: mem::MaybeUninit::zeroed
    #[cfg(not(no_global_oom_handling))]
    #[inline]
    #[unstable(feature = "new_uninit", issue = "63291")]
    #[must_use]
    pub fn new_zeroed() -> Box<mem::MaybeUninit<T>> {
        Self::new_zeroed_in(Global)
    }

    /// Constructs a new `Pin<Box<T>>`. If `T` does not implement [`Unpin`], then
    /// `x` will be pinned in memory and unable to be moved.
    ///
    /// Constructing and pinning of the `Box` can also be done in two steps: `Box::pin(x)`
    /// does the same as <code>[Box::into_pin]\([Box::new]\(x))</code>. Consider using
    /// [`into_pin`](Box::into_pin) if you already have a `Box<T>`, or if you want to
    /// construct a (pinned) `Box` in a different way than with [`Box::new`].
    #[cfg(not(no_global_oom_handling))]
    #[stable(feature = "pin", since = "1.33.0")]
    #[must_use]
    #[inline(always)]
    pub fn pin(x: T) -> Pin<Box<T>> {
        Box::new(x).into()
    }

    /// Allocates memory on the heap then places `x` into it,
    /// returning an error if the allocation fails
    ///
    /// This doesn't actually allocate if `T` is zero-sized.
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(allocator_api)]
    ///
    /// let five = Box::try_new(5)?;
    /// # Ok::<(), std::alloc::AllocError>(())
    /// ```
    #[unstable(feature = "allocator_api", issue = "32838")]
    #[inline]
    pub fn try_new(x: T) -> Result<Self, AllocError> {
        Self::try_new_in(x, Global)
    }

    /// Constructs a new box with uninitialized contents on the heap,
    /// returning an error if the allocation fails
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(allocator_api, new_uninit)]
    ///
    /// let mut five = Box::<u32>::try_new_uninit()?;
    ///
    /// let five = unsafe {
    ///     // Deferred initialization:
    ///     five.as_mut_ptr().write(5);
    ///
    ///     five.assume_init()
    /// };
    ///
    /// assert_eq!(*five, 5);
    /// # Ok::<(), std::alloc::AllocError>(())
    /// ```
    #[unstable(feature = "allocator_api", issue = "32838")]
    // #[unstable(feature = "new_uninit", issue = "63291")]
    #[inline]
    pub fn try_new_uninit() -> Result<Box<mem::MaybeUninit<T>>, AllocError> {
        Box::try_new_uninit_in(Global)
    }

    /// Constructs a new `Box` with uninitialized contents, with the memory
    /// being filled with `0` bytes on the heap
    ///
    /// See [`MaybeUninit::zeroed`][zeroed] for examples of correct and incorrect usage
    /// of this method.
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(allocator_api, new_uninit)]
    ///
    /// let zero = Box::<u32>::try_new_zeroed()?;
    /// let zero = unsafe { zero.assume_init() };
    ///
    /// assert_eq!(*zero, 0);
    /// # Ok::<(), std::alloc::AllocError>(())
    /// ```
    ///
    /// [zeroed]: mem::MaybeUninit::zeroed
    #[unstable(feature = "allocator_api", issue = "32838")]
    // #[unstable(feature = "new_uninit", issue = "63291")]
    #[inline]
    pub fn try_new_zeroed() -> Result<Box<mem::MaybeUninit<T>>, AllocError> {
        Box::try_new_zeroed_in(Global)
    }
}

impl<T, A: Allocator> Box<T, A> {
    /// Allocates memory in the given allocator then places `x` into it.
    ///
    /// This doesn't actually allocate if `T` is zero-sized.
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(allocator_api)]
    ///
    /// use std::alloc::System;
    ///
    /// let five = Box::new_in(5, System);
    /// ```
    #[cfg(not(no_global_oom_handling))]
    #[unstable(feature = "allocator_api", issue = "32838")]
    #[must_use]
    #[inline]
    pub fn new_in(x: T, alloc: A) -> Self
    where
        A: Allocator,
    {
        let mut boxed = Self::new_uninit_in(alloc);
        unsafe {
            boxed.as_mut_ptr().write(x);
            boxed.assume_init()
        }
    }

    /// Allocates memory in the given allocator then places `x` into it,
    /// returning an error if the allocation fails
    ///
    /// This doesn't actually allocate if `T` is zero-sized.
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(allocator_api)]
    ///
    /// use std::alloc::System;
    ///
    /// let five = Box::try_new_in(5, System)?;
    /// # Ok::<(), std::alloc::AllocError>(())
    /// ```
    #[unstable(feature = "allocator_api", issue = "32838")]
    #[inline]
    pub fn try_new_in(x: T, alloc: A) -> Result<Self, AllocError>
    where
        A: Allocator,
    {
        let mut boxed = Self::try_new_uninit_in(alloc)?;
        unsafe {
            boxed.as_mut_ptr().write(x);
            Ok(boxed.assume_init())
        }
    }

    /// Constructs a new box with uninitialized contents in the provided allocator.
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(allocator_api, new_uninit)]
    ///
    /// use std::alloc::System;
    ///
    /// let mut five = Box::<u32, _>::new_uninit_in(System);
    ///
    /// let five = unsafe {
    ///     // Deferred initialization:
    ///     five.as_mut_ptr().write(5);
    ///
    ///     five.assume_init()
    /// };
    ///
    /// assert_eq!(*five, 5)
    /// ```
    #[unstable(feature = "allocator_api", issue = "32838")]
    #[cfg(not(no_global_oom_handling))]
    #[must_use]
    // #[unstable(feature = "new_uninit", issue = "63291")]
    pub fn new_uninit_in(alloc: A) -> Box<mem::MaybeUninit<T>, A>
    where
        A: Allocator,
    {
        let layout = Layout::new::<mem::MaybeUninit<T>>();
        // NOTE: Prefer match over unwrap_or_else since closure sometimes not inlineable.
        // That would make code size bigger.
        match Box::try_new_uninit_in(alloc) {
            Ok(m) => m,
            Err(_) => handle_alloc_error(layout),
        }
    }

    /// Constructs a new box with uninitialized contents in the provided allocator,
    /// returning an error if the allocation fails
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(allocator_api, new_uninit)]
    ///
    /// use std::alloc::System;
    ///
    /// let mut five = Box::<u32, _>::try_new_uninit_in(System)?;
    ///
    /// let five = unsafe {
    ///     // Deferred initialization:
    ///     five.as_mut_ptr().write(5);
    ///
    ///     five.assume_init()
    /// };
    ///
    /// assert_eq!(*five, 5);
    /// # Ok::<(), std::alloc::AllocError>(())
    /// ```
    #[unstable(feature = "allocator_api", issue = "32838")]
    // #[unstable(feature = "new_uninit", issue = "63291")]
    pub fn try_new_uninit_in(alloc: A) -> Result<Box<mem::MaybeUninit<T>, A>, AllocError>
    where
        A: Allocator,
    {
        let ptr = if T::IS_ZST {
            NonNull::dangling()
        } else {
            let layout = Layout::new::<mem::MaybeUninit<T>>();
            alloc.allocate(layout)?.cast()
        };
        unsafe { Ok(Box::from_raw_in(ptr.as_ptr(), alloc)) }
    }

    /// Constructs a new `Box` with uninitialized contents, with the memory
    /// being filled with `0` bytes in the provided allocator.
    ///
    /// See [`MaybeUninit::zeroed`][zeroed] for examples of correct and incorrect usage
    /// of this method.
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(allocator_api, new_uninit)]
    ///
    /// use std::alloc::System;
    ///
    /// let zero = Box::<u32, _>::new_zeroed_in(System);
    /// let zero = unsafe { zero.assume_init() };
    ///
    /// assert_eq!(*zero, 0)
    /// ```
    ///
    /// [zeroed]: mem::MaybeUninit::zeroed
    #[unstable(feature = "allocator_api", issue = "32838")]
    #[cfg(not(no_global_oom_handling))]
    // #[unstable(feature = "new_uninit", issue = "63291")]
    #[must_use]
    pub fn new_zeroed_in(alloc: A) -> Box<mem::MaybeUninit<T>, A>
    where
        A: Allocator,
    {
        let layout = Layout::new::<mem::MaybeUninit<T>>();
        // NOTE: Prefer match over unwrap_or_else since closure sometimes not inlineable.
        // That would make code size bigger.
        match Box::try_new_zeroed_in(alloc) {
            Ok(m) => m,
            Err(_) => handle_alloc_error(layout),
        }
    }

    /// Constructs a new `Box` with uninitialized contents, with the memory
    /// being filled with `0` bytes in the provided allocator,
    /// returning an error if the allocation fails,
    ///
    /// See [`MaybeUninit::zeroed`][zeroed] for examples of correct and incorrect usage
    /// of this method.
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(allocator_api, new_uninit)]
    ///
    /// use std::alloc::System;
    ///
    /// let zero = Box::<u32, _>::try_new_zeroed_in(System)?;
    /// let zero = unsafe { zero.assume_init() };
    ///
    /// assert_eq!(*zero, 0);
    /// # Ok::<(), std::alloc::AllocError>(())
    /// ```
    ///
    /// [zeroed]: mem::MaybeUninit::zeroed
    #[unstable(feature = "allocator_api", issue = "32838")]
    // #[unstable(feature = "new_uninit", issue = "63291")]
    pub fn try_new_zeroed_in(alloc: A) -> Result<Box<mem::MaybeUninit<T>, A>, AllocError>
    where
        A: Allocator,
    {
        let ptr = if T::IS_ZST {
            NonNull::dangling()
        } else {
            let layout = Layout::new::<mem::MaybeUninit<T>>();
            alloc.allocate_zeroed(layout)?.cast()
        };
        unsafe { Ok(Box::from_raw_in(ptr.as_ptr(), alloc)) }
    }

    /// Constructs a new `Pin<Box<T, A>>`. If `T` does not implement [`Unpin`], then
    /// `x` will be pinned in memory and unable to be moved.
    ///
    /// Constructing and pinning of the `Box` can also be done in two steps: `Box::pin_in(x, alloc)`
    /// does the same as <code>[Box::into_pin]\([Box::new_in]\(x, alloc))</code>. Consider using
    /// [`into_pin`](Box::into_pin) if you already have a `Box<T, A>`, or if you want to
    /// construct a (pinned) `Box` in a different way than with [`Box::new_in`].
    #[cfg(not(no_global_oom_handling))]
    #[unstable(feature = "allocator_api", issue = "32838")]
    #[must_use]
    #[inline(always)]
    pub fn pin_in(x: T, alloc: A) -> Pin<Self>
    where
        A: 'static + Allocator,
    {
        Self::into_pin(Self::new_in(x, alloc))
    }

    /// Converts a `Box<T>` into a `Box<[T]>`
    ///
    /// This conversion does not allocate on the heap and happens in place.
    #[unstable(feature = "box_into_boxed_slice", issue = "71582")]
    pub fn into_boxed_slice(boxed: Self) -> Box<[T], A> {
        let (raw, alloc) = Box::into_raw_with_allocator(boxed);
        unsafe { Box::from_raw_in(raw as *mut [T; 1], alloc) }
    }

    /// Consumes the `Box`, returning the wrapped value.
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(box_into_inner)]
    ///
    /// let c = Box::new(5);
    ///
    /// assert_eq!(Box::into_inner(c), 5);
    /// ```
    #[unstable(feature = "box_into_inner", issue = "80437")]
    #[inline]
    pub fn into_inner(boxed: Self) -> T {
        *boxed
    }
}

impl<T> Box<[T]> {
    /// Constructs a new boxed slice with uninitialized contents.
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(new_uninit)]
    ///
    /// let mut values = Box::<[u32]>::new_uninit_slice(3);
    ///
    /// let values = unsafe {
    ///     // Deferred initialization:
    ///     values[0].as_mut_ptr().write(1);
    ///     values[1].as_mut_ptr().write(2);
    ///     values[2].as_mut_ptr().write(3);
    ///
    ///     values.assume_init()
    /// };
    ///
    /// assert_eq!(*values, [1, 2, 3])
    /// ```
    #[cfg(not(no_global_oom_handling))]
    #[unstable(feature = "new_uninit", issue = "63291")]
    #[must_use]
    pub fn new_uninit_slice(len: usize) -> Box<[mem::MaybeUninit<T>]> {
        unsafe { RawVec::with_capacity(len).into_box(len) }
    }

    /// Constructs a new boxed slice with uninitialized contents, with the memory
    /// being filled with `0` bytes.
    ///
    /// See [`MaybeUninit::zeroed`][zeroed] for examples of correct and incorrect usage
    /// of this method.
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(new_uninit)]
    ///
    /// let values = Box::<[u32]>::new_zeroed_slice(3);
    /// let values = unsafe { values.assume_init() };
    ///
    /// assert_eq!(*values, [0, 0, 0])
    /// ```
    ///
    /// [zeroed]: mem::MaybeUninit::zeroed
    #[cfg(not(no_global_oom_handling))]
    #[unstable(feature = "new_uninit", issue = "63291")]
    #[must_use]
    pub fn new_zeroed_slice(len: usize) -> Box<[mem::MaybeUninit<T>]> {
        unsafe { RawVec::with_capacity_zeroed(len).into_box(len) }
    }

    /// Constructs a new boxed slice with uninitialized contents. Returns an error if
    /// the allocation fails
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(allocator_api, new_uninit)]
    ///
    /// let mut values = Box::<[u32]>::try_new_uninit_slice(3)?;
    /// let values = unsafe {
    ///     // Deferred initialization:
    ///     values[0].as_mut_ptr().write(1);
    ///     values[1].as_mut_ptr().write(2);
    ///     values[2].as_mut_ptr().write(3);
    ///     values.assume_init()
    /// };
    ///
    /// assert_eq!(*values, [1, 2, 3]);
    /// # Ok::<(), std::alloc::AllocError>(())
    /// ```
    #[unstable(feature = "allocator_api", issue = "32838")]
    #[inline]
    pub fn try_new_uninit_slice(len: usize) -> Result<Box<[mem::MaybeUninit<T>]>, AllocError> {
        let ptr = if T::IS_ZST || len == 0 {
            NonNull::dangling()
        } else {
            let layout = match Layout::array::<mem::MaybeUninit<T>>(len) {
                Ok(l) => l,
                Err(_) => return Err(AllocError),
            };
            Global.allocate(layout)?.cast()
        };
        unsafe { Ok(RawVec::from_raw_parts_in(ptr.as_ptr(), len, Global).into_box(len)) }
    }

    /// Constructs a new boxed slice with uninitialized contents, with the memory
    /// being filled with `0` bytes. Returns an error if the allocation fails
    ///
    /// See [`MaybeUninit::zeroed`][zeroed] for examples of correct and incorrect usage
    /// of this method.
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(allocator_api, new_uninit)]
    ///
    /// let values = Box::<[u32]>::try_new_zeroed_slice(3)?;
    /// let values = unsafe { values.assume_init() };
    ///
    /// assert_eq!(*values, [0, 0, 0]);
    /// # Ok::<(), std::alloc::AllocError>(())
    /// ```
    ///
    /// [zeroed]: mem::MaybeUninit::zeroed
    #[unstable(feature = "allocator_api", issue = "32838")]
    #[inline]
    pub fn try_new_zeroed_slice(len: usize) -> Result<Box<[mem::MaybeUninit<T>]>, AllocError> {
        let ptr = if T::IS_ZST || len == 0 {
            NonNull::dangling()
        } else {
            let layout = match Layout::array::<mem::MaybeUninit<T>>(len) {
                Ok(l) => l,
                Err(_) => return Err(AllocError),
            };
            Global.allocate_zeroed(layout)?.cast()
        };
        unsafe { Ok(RawVec::from_raw_parts_in(ptr.as_ptr(), len, Global).into_box(len)) }
    }
}

impl<T, A: Allocator> Box<[T], A> {
    /// Constructs a new boxed slice with uninitialized contents in the provided allocator.
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(allocator_api, new_uninit)]
    ///
    /// use std::alloc::System;
    ///
    /// let mut values = Box::<[u32], _>::new_uninit_slice_in(3, System);
    ///
    /// let values = unsafe {
    ///     // Deferred initialization:
    ///     values[0].as_mut_ptr().write(1);
    ///     values[1].as_mut_ptr().write(2);
    ///     values[2].as_mut_ptr().write(3);
    ///
    ///     values.assume_init()
    /// };
    ///
    /// assert_eq!(*values, [1, 2, 3])
    /// ```
    #[cfg(not(no_global_oom_handling))]
    #[unstable(feature = "allocator_api", issue = "32838")]
    // #[unstable(feature = "new_uninit", issue = "63291")]
    #[must_use]
    pub fn new_uninit_slice_in(len: usize, alloc: A) -> Box<[mem::MaybeUninit<T>], A> {
        unsafe { RawVec::with_capacity_in(len, alloc).into_box(len) }
    }

    /// Constructs a new boxed slice with uninitialized contents in the provided allocator,
    /// with the memory being filled with `0` bytes.
    ///
    /// See [`MaybeUninit::zeroed`][zeroed] for examples of correct and incorrect usage
    /// of this method.
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(allocator_api, new_uninit)]
    ///
    /// use std::alloc::System;
    ///
    /// let values = Box::<[u32], _>::new_zeroed_slice_in(3, System);
    /// let values = unsafe { values.assume_init() };
    ///
    /// assert_eq!(*values, [0, 0, 0])
    /// ```
    ///
    /// [zeroed]: mem::MaybeUninit::zeroed
    #[cfg(not(no_global_oom_handling))]
    #[unstable(feature = "allocator_api", issue = "32838")]
    // #[unstable(feature = "new_uninit", issue = "63291")]
    #[must_use]
    pub fn new_zeroed_slice_in(len: usize, alloc: A) -> Box<[mem::MaybeUninit<T>], A> {
        unsafe { RawVec::with_capacity_zeroed_in(len, alloc).into_box(len) }
    }
}

impl<T, A: Allocator> Box<mem::MaybeUninit<T>, A> {
    /// Converts to `Box<T, A>`.
    ///
    /// # Safety
    ///
    /// As with [`MaybeUninit::assume_init`],
    /// it is up to the caller to guarantee that the value
    /// really is in an initialized state.
    /// Calling this when the content is not yet fully initialized
    /// causes immediate undefined behavior.
    ///
    /// [`MaybeUninit::assume_init`]: mem::MaybeUninit::assume_init
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(new_uninit)]
    ///
    /// let mut five = Box::<u32>::new_uninit();
    ///
    /// let five: Box<u32> = unsafe {
    ///     // Deferred initialization:
    ///     five.as_mut_ptr().write(5);
    ///
    ///     five.assume_init()
    /// };
    ///
    /// assert_eq!(*five, 5)
    /// ```
    #[unstable(feature = "new_uninit", issue = "63291")]
    #[inline]
    pub unsafe fn assume_init(self) -> Box<T, A> {
        let (raw, alloc) = Box::into_raw_with_allocator(self);
        unsafe { Box::from_raw_in(raw as *mut T, alloc) }
    }

    /// Writes the value and converts to `Box<T, A>`.
    ///
    /// This method converts the box similarly to [`Box::assume_init`] but
    /// writes `value` into it before conversion thus guaranteeing safety.
    /// In some scenarios use of this method may improve performance because
    /// the compiler may be able to optimize copying from stack.
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(new_uninit)]
    ///
    /// let big_box = Box::<[usize; 1024]>::new_uninit();
    ///
    /// let mut array = [0; 1024];
    /// for (i, place) in array.iter_mut().enumerate() {
    ///     *place = i;
    /// }
    ///
    /// // The optimizer may be able to elide this copy, so previous code writes
    /// // to heap directly.
    /// let big_box = Box::write(big_box, array);
    ///
    /// for (i, x) in big_box.iter().enumerate() {
    ///     assert_eq!(*x, i);
    /// }
    /// ```
    #[unstable(feature = "new_uninit", issue = "63291")]
    #[inline]
    pub fn write(mut boxed: Self, value: T) -> Box<T, A> {
        unsafe {
            (*boxed).write(value);
            boxed.assume_init()
        }
    }
}

impl<T, A: Allocator> Box<[mem::MaybeUninit<T>], A> {
    /// Converts to `Box<[T], A>`.
    ///
    /// # Safety
    ///
    /// As with [`MaybeUninit::assume_init`],
    /// it is up to the caller to guarantee that the values
    /// really are in an initialized state.
    /// Calling this when the content is not yet fully initialized
    /// causes immediate undefined behavior.
    ///
    /// [`MaybeUninit::assume_init`]: mem::MaybeUninit::assume_init
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(new_uninit)]
    ///
    /// let mut values = Box::<[u32]>::new_uninit_slice(3);
    ///
    /// let values = unsafe {
    ///     // Deferred initialization:
    ///     values[0].as_mut_ptr().write(1);
    ///     values[1].as_mut_ptr().write(2);
    ///     values[2].as_mut_ptr().write(3);
    ///
    ///     values.assume_init()
    /// };
    ///
    /// assert_eq!(*values, [1, 2, 3])
    /// ```
    #[unstable(feature = "new_uninit", issue = "63291")]
    #[inline]
    pub unsafe fn assume_init(self) -> Box<[T], A> {
        let (raw, alloc) = Box::into_raw_with_allocator(self);
        unsafe { Box::from_raw_in(raw as *mut [T], alloc) }
    }
}

impl<T: ?Sized> Box<T> {
    /// Constructs a box from a raw pointer.
    ///
    /// After calling this function, the raw pointer is owned by the
    /// resulting `Box`. Specifically, the `Box` destructor will call
    /// the destructor of `T` and free the allocated memory. For this
    /// to be safe, the memory must have been allocated in accordance
    /// with the [memory layout] used by `Box` .
    ///
    /// # Safety
    ///
    /// This function is unsafe because improper use may lead to
    /// memory problems. For example, a double-free may occur if the
    /// function is called twice on the same raw pointer.
    ///
    /// The safety conditions are described in the [memory layout] section.
    ///
    /// # Examples
    ///
    /// Recreate a `Box` which was previously converted to a raw pointer
    /// using [`Box::into_raw`]:
    /// ```
    /// let x = Box::new(5);
    /// let ptr = Box::into_raw(x);
    /// let x = unsafe { Box::from_raw(ptr) };
    /// ```
    /// Manually create a `Box` from scratch by using the global allocator:
    /// ```
    /// use std::alloc::{alloc, Layout};
    ///
    /// unsafe {
    ///     let ptr = alloc(Layout::new::<i32>()) as *mut i32;
    ///     // In general .write is required to avoid attempting to destruct
    ///     // the (uninitialized) previous contents of `ptr`, though for this
    ///     // simple example `*ptr = 5` would have worked as well.
    ///     ptr.write(5);
    ///     let x = Box::from_raw(ptr);
    /// }
    /// ```
    ///
    /// [memory layout]: self#memory-layout
    /// [`Layout`]: crate::Layout
    #[stable(feature = "box_raw", since = "1.4.0")]
    #[inline]
    #[must_use = "call `drop(Box::from_raw(ptr))` if you intend to drop the `Box`"]
    pub unsafe fn from_raw(raw: *mut T) -> Self {
        unsafe { Self::from_raw_in(raw, Global) }
    }
}

impl<T: ?Sized, A: Allocator> Box<T, A> {
    /// Constructs a box from a raw pointer in the given allocator.
    ///
    /// After calling this function, the raw pointer is owned by the
    /// resulting `Box`. Specifically, the `Box` destructor will call
    /// the destructor of `T` and free the allocated memory. For this
    /// to be safe, the memory must have been allocated in accordance
    /// with the [memory layout] used by `Box` .
    ///
    /// # Safety
    ///
    /// This function is unsafe because improper use may lead to
    /// memory problems. For example, a double-free may occur if the
    /// function is called twice on the same raw pointer.
    ///
    ///
    /// # Examples
    ///
    /// Recreate a `Box` which was previously converted to a raw pointer
    /// using [`Box::into_raw_with_allocator`]:
    /// ```
    /// #![feature(allocator_api)]
    ///
    /// use std::alloc::System;
    ///
    /// let x = Box::new_in(5, System);
    /// let (ptr, alloc) = Box::into_raw_with_allocator(x);
    /// let x = unsafe { Box::from_raw_in(ptr, alloc) };
    /// ```
    /// Manually create a `Box` from scratch by using the system allocator:
    /// ```
    /// #![feature(allocator_api, slice_ptr_get)]
    ///
    /// use std::alloc::{Allocator, Layout, System};
    ///
    /// unsafe {
    ///     let ptr = System.allocate(Layout::new::<i32>())?.as_mut_ptr() as *mut i32;
    ///     // In general .write is required to avoid attempting to destruct
    ///     // the (uninitialized) previous contents of `ptr`, though for this
    ///     // simple example `*ptr = 5` would have worked as well.
    ///     ptr.write(5);
    ///     let x = Box::from_raw_in(ptr, System);
    /// }
    /// # Ok::<(), std::alloc::AllocError>(())
    /// ```
    ///
    /// [memory layout]: self#memory-layout
    /// [`Layout`]: crate::Layout
    #[unstable(feature = "allocator_api", issue = "32838")]
    #[rustc_const_unstable(feature = "const_box", issue = "92521")]
    #[inline]
    pub const unsafe fn from_raw_in(raw: *mut T, alloc: A) -> Self {
        Box(unsafe { Unique::new_unchecked(raw) }, alloc)
    }

    /// Consumes the `Box`, returning a wrapped raw pointer.
    ///
    /// The pointer will be properly aligned and non-null.
    ///
    /// After calling this function, the caller is responsible for the
    /// memory previously managed by the `Box`. In particular, the
    /// caller should properly destroy `T` and release the memory, taking
    /// into account the [memory layout] used by `Box`. The easiest way to
    /// do this is to convert the raw pointer back into a `Box` with the
    /// [`Box::from_raw`] function, allowing the `Box` destructor to perform
    /// the cleanup.
    ///
    /// Note: this is an associated function, which means that you have
    /// to call it as `Box::into_raw(b)` instead of `b.into_raw()`. This
    /// is so that there is no conflict with a method on the inner type.
    ///
    /// # Examples
    /// Converting the raw pointer back into a `Box` with [`Box::from_raw`]
    /// for automatic cleanup:
    /// ```
    /// let x = Box::new(String::from("Hello"));
    /// let ptr = Box::into_raw(x);
    /// let x = unsafe { Box::from_raw(ptr) };
    /// ```
    /// Manual cleanup by explicitly running the destructor and deallocating
    /// the memory:
    /// ```
    /// use std::alloc::{dealloc, Layout};
    /// use std::ptr;
    ///
    /// let x = Box::new(String::from("Hello"));
    /// let ptr = Box::into_raw(x);
    /// unsafe {
    ///     ptr::drop_in_place(ptr);
    ///     dealloc(ptr as *mut u8, Layout::new::<String>());
    /// }
    /// ```
    /// Note: This is equivalent to the following:
    /// ```
    /// let x = Box::new(String::from("Hello"));
    /// let ptr = Box::into_raw(x);
    /// unsafe {
    ///     drop(Box::from_raw(ptr));
    /// }
    /// ```
    ///
    /// [memory layout]: self#memory-layout
    #[stable(feature = "box_raw", since = "1.4.0")]
    #[inline]
    pub fn into_raw(b: Self) -> *mut T {
        // Make sure Miri realizes that we transition from a noalias pointer to a raw pointer here.
        unsafe { addr_of_mut!(*&mut *Self::into_raw_with_allocator(b).0) }
    }

    /// Consumes the `Box`, returning a wrapped raw pointer and the allocator.
    ///
    /// The pointer will be properly aligned and non-null.
    ///
    /// After calling this function, the caller is responsible for the
    /// memory previously managed by the `Box`. In particular, the
    /// caller should properly destroy `T` and release the memory, taking
    /// into account the [memory layout] used by `Box`. The easiest way to
    /// do this is to convert the raw pointer back into a `Box` with the
    /// [`Box::from_raw_in`] function, allowing the `Box` destructor to perform
    /// the cleanup.
    ///
    /// Note: this is an associated function, which means that you have
    /// to call it as `Box::into_raw_with_allocator(b)` instead of `b.into_raw_with_allocator()`. This
    /// is so that there is no conflict with a method on the inner type.
    ///
    /// # Examples
    /// Converting the raw pointer back into a `Box` with [`Box::from_raw_in`]
    /// for automatic cleanup:
    /// ```
    /// #![feature(allocator_api)]
    ///
    /// use std::alloc::System;
    ///
    /// let x = Box::new_in(String::from("Hello"), System);
    /// let (ptr, alloc) = Box::into_raw_with_allocator(x);
    /// let x = unsafe { Box::from_raw_in(ptr, alloc) };
    /// ```
    /// Manual cleanup by explicitly running the destructor and deallocating
    /// the memory:
    /// ```
    /// #![feature(allocator_api)]
    ///
    /// use std::alloc::{Allocator, Layout, System};
    /// use std::ptr::{self, NonNull};
    ///
    /// let x = Box::new_in(String::from("Hello"), System);
    /// let (ptr, alloc) = Box::into_raw_with_allocator(x);
    /// unsafe {
    ///     ptr::drop_in_place(ptr);
    ///     let non_null = NonNull::new_unchecked(ptr);
    ///     alloc.deallocate(non_null.cast(), Layout::new::<String>());
    /// }
    /// ```
    ///
    /// [memory layout]: self#memory-layout
    #[unstable(feature = "allocator_api", issue = "32838")]
    #[inline]
    pub fn into_raw_with_allocator(b: Self) -> (*mut T, A) {
        let mut b = mem::ManuallyDrop::new(b);
        // We carefully get the raw pointer out in a way that Miri's aliasing model understands what
        // is happening: using the primitive "deref" of `Box`. In case `A` is *not* `Global`, we
        // want *no* aliasing requirements here!
        // In case `A` *is* `Global`, this does not quite have the right behavior; `into_raw`
        // works around that.
        let ptr = addr_of_mut!(**b);
        let alloc = unsafe { ptr::read(&b.1) };
        (ptr, alloc)
    }

    #[unstable(
        feature = "ptr_internals",
        issue = "none",
        reason = "use `Box::leak(b).into()` or `Unique::from(Box::leak(b))` instead"
    )]
    #[inline]
    #[doc(hidden)]
    pub fn into_unique(b: Self) -> (Unique<T>, A) {
        let (ptr, alloc) = Box::into_raw_with_allocator(b);
        unsafe { (Unique::from(&mut *ptr), alloc) }
    }

    /// Returns a reference to the underlying allocator.
    ///
    /// Note: this is an associated function, which means that you have
    /// to call it as `Box::allocator(&b)` instead of `b.allocator()`. This
    /// is so that there is no conflict with a method on the inner type.
    #[unstable(feature = "allocator_api", issue = "32838")]
    #[rustc_const_unstable(feature = "const_box", issue = "92521")]
    #[inline]
    pub const fn allocator(b: &Self) -> &A {
        &b.1
    }

    /// Consumes and leaks the `Box`, returning a mutable reference,
    /// `&'a mut T`. Note that the type `T` must outlive the chosen lifetime
    /// `'a`. If the type has only static references, or none at all, then this
    /// may be chosen to be `'static`.
    ///
    /// This function is mainly useful for data that lives for the remainder of
    /// the program's life. Dropping the returned reference will cause a memory
    /// leak. If this is not acceptable, the reference should first be wrapped
    /// with the [`Box::from_raw`] function producing a `Box`. This `Box` can
    /// then be dropped which will properly destroy `T` and release the
    /// allocated memory.
    ///
    /// Note: this is an associated function, which means that you have
    /// to call it as `Box::leak(b)` instead of `b.leak()`. This
    /// is so that there is no conflict with a method on the inner type.
    ///
    /// # Examples
    ///
    /// Simple usage:
    ///
    /// ```
    /// let x = Box::new(41);
    /// let static_ref: &'static mut usize = Box::leak(x);
    /// *static_ref += 1;
    /// assert_eq!(*static_ref, 42);
    /// # // FIXME(https://github.com/rust-lang/miri/issues/3670):
    /// # // use -Zmiri-disable-leak-check instead of unleaking in tests meant to leak.
    /// # drop(unsafe { Box::from_raw(static_ref) });
    /// ```
    ///
    /// Unsized data:
    ///
    /// ```
    /// let x = vec![1, 2, 3].into_boxed_slice();
    /// let static_ref = Box::leak(x);
    /// static_ref[0] = 4;
    /// assert_eq!(*static_ref, [4, 2, 3]);
    /// # // FIXME(https://github.com/rust-lang/miri/issues/3670):
    /// # // use -Zmiri-disable-leak-check instead of unleaking in tests meant to leak.
    /// # drop(unsafe { Box::from_raw(static_ref) });
    /// ```
    #[stable(feature = "box_leak", since = "1.26.0")]
    #[inline]
    pub fn leak<'a>(b: Self) -> &'a mut T
    where
        A: 'a,
    {
        unsafe { &mut *Box::into_raw(b) }
    }

    /// Converts a `Box<T>` into a `Pin<Box<T>>`. If `T` does not implement [`Unpin`], then
    /// `*boxed` will be pinned in memory and unable to be moved.
    ///
    /// This conversion does not allocate on the heap and happens in place.
    ///
    /// This is also available via [`From`].
    ///
    /// Constructing and pinning a `Box` with <code>Box::into_pin([Box::new]\(x))</code>
    /// can also be written more concisely using <code>[Box::pin]\(x)</code>.
    /// This `into_pin` method is useful if you already have a `Box<T>`, or you are
    /// constructing a (pinned) `Box` in a different way than with [`Box::new`].
    ///
    /// # Notes
    ///
    /// It's not recommended that crates add an impl like `From<Box<T>> for Pin<T>`,
    /// as it'll introduce an ambiguity when calling `Pin::from`.
    /// A demonstration of such a poor impl is shown below.
    ///
    /// ```compile_fail
    /// # use std::pin::Pin;
    /// struct Foo; // A type defined in this crate.
    /// impl From<Box<()>> for Pin<Foo> {
    ///     fn from(_: Box<()>) -> Pin<Foo> {
    ///         Pin::new(Foo)
    ///     }
    /// }
    ///
    /// let foo = Box::new(());
    /// let bar = Pin::from(foo);
    /// ```
    #[stable(feature = "box_into_pin", since = "1.63.0")]
    #[rustc_const_unstable(feature = "const_box", issue = "92521")]
    pub const fn into_pin(boxed: Self) -> Pin<Self>
    where
        A: 'static,
    {
        // It's not possible to move or replace the insides of a `Pin<Box<T>>`
        // when `T: !Unpin`, so it's safe to pin it directly without any
        // additional requirements.
        unsafe { Pin::new_unchecked(boxed) }
    }
}

#[stable(feature = "rust1", since = "1.0.0")]
unsafe impl<#[may_dangle] T: ?Sized, A: Allocator> Drop for Box<T, A> {
    #[inline]
    fn drop(&mut self) {
        // the T in the Box is dropped by the compiler before the destructor is run

        let ptr = self.0;

        unsafe {
            let layout = Layout::for_value_raw(ptr.as_ptr());
            if layout.size() != 0 {
                self.1.deallocate(From::from(ptr.cast()), layout);
            }
        }
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "rust1", since = "1.0.0")]
impl<T: Default> Default for Box<T> {
    /// Creates a `Box<T>`, with the `Default` value for T.
    #[inline]
    fn default() -> Self {
        Box::new(T::default())
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "rust1", since = "1.0.0")]
impl<T> Default for Box<[T]> {
    #[inline]
    fn default() -> Self {
        let ptr: Unique<[T]> = Unique::<[T; 0]>::dangling();
        Box(ptr, Global)
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "default_box_extra", since = "1.17.0")]
impl Default for Box<str> {
    #[inline]
    fn default() -> Self {
        // SAFETY: This is the same as `Unique::cast<U>` but with an unsized `U = str`.
        let ptr: Unique<str> = unsafe {
            let bytes: Unique<[u8]> = Unique::<[u8; 0]>::dangling();
            Unique::new_unchecked(bytes.as_ptr() as *mut str)
        };
        Box(ptr, Global)
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "rust1", since = "1.0.0")]
impl<T: Clone, A: Allocator + Clone> Clone for Box<T, A> {
    /// Returns a new box with a `clone()` of this box's contents.
    ///
    /// # Examples
    ///
    /// ```
    /// let x = Box::new(5);
    /// let y = x.clone();
    ///
    /// // The value is the same
    /// assert_eq!(x, y);
    ///
    /// // But they are unique objects
    /// assert_ne!(&*x as *const i32, &*y as *const i32);
    /// ```
    #[inline]
    fn clone(&self) -> Self {
        // Pre-allocate memory to allow writing the cloned value directly.
        let mut boxed = Self::new_uninit_in(self.1.clone());
        unsafe {
            (**self).clone_to_uninit(boxed.as_mut_ptr());
            boxed.assume_init()
        }
    }

    /// Copies `source`'s contents into `self` without creating a new allocation.
    ///
    /// # Examples
    ///
    /// ```
    /// let x = Box::new(5);
    /// let mut y = Box::new(10);
    /// let yp: *const i32 = &*y;
    ///
    /// y.clone_from(&x);
    ///
    /// // The value is the same
    /// assert_eq!(x, y);
    ///
    /// // And no allocation occurred
    /// assert_eq!(yp, &*y);
    /// ```
    #[inline]
    fn clone_from(&mut self, source: &Self) {
        (**self).clone_from(&(**source));
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "box_slice_clone", since = "1.3.0")]
impl Clone for Box<str> {
    fn clone(&self) -> Self {
        // this makes a copy of the data
        let buf: Box<[u8]> = self.as_bytes().into();
        unsafe { from_boxed_utf8_unchecked(buf) }
    }
}

#[stable(feature = "rust1", since = "1.0.0")]
impl<T: ?Sized + PartialEq, A: Allocator> PartialEq for Box<T, A> {
    #[inline]
    fn eq(&self, other: &Self) -> bool {
        PartialEq::eq(&**self, &**other)
    }
    #[inline]
    fn ne(&self, other: &Self) -> bool {
        PartialEq::ne(&**self, &**other)
    }
}
#[stable(feature = "rust1", since = "1.0.0")]
impl<T: ?Sized + PartialOrd, A: Allocator> PartialOrd for Box<T, A> {
    #[inline]
    fn partial_cmp(&self, other: &Self) -> Option<Ordering> {
        PartialOrd::partial_cmp(&**self, &**other)
    }
    #[inline]
    fn lt(&self, other: &Self) -> bool {
        PartialOrd::lt(&**self, &**other)
    }
    #[inline]
    fn le(&self, other: &Self) -> bool {
        PartialOrd::le(&**self, &**other)
    }
    #[inline]
    fn ge(&self, other: &Self) -> bool {
        PartialOrd::ge(&**self, &**other)
    }
    #[inline]
    fn gt(&self, other: &Self) -> bool {
        PartialOrd::gt(&**self, &**other)
    }
}
#[stable(feature = "rust1", since = "1.0.0")]
impl<T: ?Sized + Ord, A: Allocator> Ord for Box<T, A> {
    #[inline]
    fn cmp(&self, other: &Self) -> Ordering {
        Ord::cmp(&**self, &**other)
    }
}
#[stable(feature = "rust1", since = "1.0.0")]
impl<T: ?Sized + Eq, A: Allocator> Eq for Box<T, A> {}

#[stable(feature = "rust1", since = "1.0.0")]
impl<T: ?Sized + Hash, A: Allocator> Hash for Box<T, A> {
    fn hash<H: Hasher>(&self, state: &mut H) {
        (**self).hash(state);
    }
}

#[stable(feature = "indirect_hasher_impl", since = "1.22.0")]
impl<T: ?Sized + Hasher, A: Allocator> Hasher for Box<T, A> {
    fn finish(&self) -> u64 {
        (**self).finish()
    }
    fn write(&mut self, bytes: &[u8]) {
        (**self).write(bytes)
    }
    fn write_u8(&mut self, i: u8) {
        (**self).write_u8(i)
    }
    fn write_u16(&mut self, i: u16) {
        (**self).write_u16(i)
    }
    fn write_u32(&mut self, i: u32) {
        (**self).write_u32(i)
    }
    fn write_u64(&mut self, i: u64) {
        (**self).write_u64(i)
    }
    fn write_u128(&mut self, i: u128) {
        (**self).write_u128(i)
    }
    fn write_usize(&mut self, i: usize) {
        (**self).write_usize(i)
    }
    fn write_i8(&mut self, i: i8) {
        (**self).write_i8(i)
    }
    fn write_i16(&mut self, i: i16) {
        (**self).write_i16(i)
    }
    fn write_i32(&mut self, i: i32) {
        (**self).write_i32(i)
    }
    fn write_i64(&mut self, i: i64) {
        (**self).write_i64(i)
    }
    fn write_i128(&mut self, i: i128) {
        (**self).write_i128(i)
    }
    fn write_isize(&mut self, i: isize) {
        (**self).write_isize(i)
    }
    fn write_length_prefix(&mut self, len: usize) {
        (**self).write_length_prefix(len)
    }
    fn write_str(&mut self, s: &str) {
        (**self).write_str(s)
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "from_for_ptrs", since = "1.6.0")]
impl<T> From<T> for Box<T> {
    /// Converts a `T` into a `Box<T>`
    ///
    /// The conversion allocates on the heap and moves `t`
    /// from the stack into it.
    ///
    /// # Examples
    ///
    /// ```rust
    /// let x = 5;
    /// let boxed = Box::new(5);
    ///
    /// assert_eq!(Box::from(x), boxed);
    /// ```
    fn from(t: T) -> Self {
        Box::new(t)
    }
}

#[stable(feature = "pin", since = "1.33.0")]
impl<T: ?Sized, A: Allocator> From<Box<T, A>> for Pin<Box<T, A>>
where
    A: 'static,
{
    /// Converts a `Box<T>` into a `Pin<Box<T>>`. If `T` does not implement [`Unpin`], then
    /// `*boxed` will be pinned in memory and unable to be moved.
    ///
    /// This conversion does not allocate on the heap and happens in place.
    ///
    /// This is also available via [`Box::into_pin`].
    ///
    /// Constructing and pinning a `Box` with <code><Pin<Box\<T>>>::from([Box::new]\(x))</code>
    /// can also be written more concisely using <code>[Box::pin]\(x)</code>.
    /// This `From` implementation is useful if you already have a `Box<T>`, or you are
    /// constructing a (pinned) `Box` in a different way than with [`Box::new`].
    fn from(boxed: Box<T, A>) -> Self {
        Box::into_pin(boxed)
    }
}

/// Specialization trait used for `From<&[T]>`.
#[cfg(not(no_global_oom_handling))]
trait BoxFromSlice<T> {
    fn from_slice(slice: &[T]) -> Self;
}

#[cfg(not(no_global_oom_handling))]
impl<T: Clone> BoxFromSlice<T> for Box<[T]> {
    #[inline]
    default fn from_slice(slice: &[T]) -> Self {
        slice.to_vec().into_boxed_slice()
    }
}

#[cfg(not(no_global_oom_handling))]
impl<T: Copy> BoxFromSlice<T> for Box<[T]> {
    #[inline]
    fn from_slice(slice: &[T]) -> Self {
        let len = slice.len();
        let buf = RawVec::with_capacity(len);
        unsafe {
            ptr::copy_nonoverlapping(slice.as_ptr(), buf.ptr(), len);
            buf.into_box(slice.len()).assume_init()
        }
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "box_from_slice", since = "1.17.0")]
impl<T: Clone> From<&[T]> for Box<[T]> {
    /// Converts a `&[T]` into a `Box<[T]>`
    ///
    /// This conversion allocates on the heap
    /// and performs a copy of `slice` and its contents.
    ///
    /// # Examples
    /// ```rust
    /// // create a &[u8] which will be used to create a Box<[u8]>
    /// let slice: &[u8] = &[104, 101, 108, 108, 111];
    /// let boxed_slice: Box<[u8]> = Box::from(slice);
    ///
    /// println!("{boxed_slice:?}");
    /// ```
    #[inline]
    fn from(slice: &[T]) -> Box<[T]> {
        <Self as BoxFromSlice<T>>::from_slice(slice)
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "box_from_cow", since = "1.45.0")]
impl<T: Clone> From<Cow<'_, [T]>> for Box<[T]> {
    /// Converts a `Cow<'_, [T]>` into a `Box<[T]>`
    ///
    /// When `cow` is the `Cow::Borrowed` variant, this
    /// conversion allocates on the heap and copies the
    /// underlying slice. Otherwise, it will try to reuse the owned
    /// `Vec`'s allocation.
    #[inline]
    fn from(cow: Cow<'_, [T]>) -> Box<[T]> {
        match cow {
            Cow::Borrowed(slice) => Box::from(slice),
            Cow::Owned(slice) => Box::from(slice),
        }
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "box_from_slice", since = "1.17.0")]
impl From<&str> for Box<str> {
    /// Converts a `&str` into a `Box<str>`
    ///
    /// This conversion allocates on the heap
    /// and performs a copy of `s`.
    ///
    /// # Examples
    ///
    /// ```rust
    /// let boxed: Box<str> = Box::from("hello");
    /// println!("{boxed}");
    /// ```
    #[inline]
    fn from(s: &str) -> Box<str> {
        unsafe { from_boxed_utf8_unchecked(Box::from(s.as_bytes())) }
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "box_from_cow", since = "1.45.0")]
impl From<Cow<'_, str>> for Box<str> {
    /// Converts a `Cow<'_, str>` into a `Box<str>`
    ///
    /// When `cow` is the `Cow::Borrowed` variant, this
    /// conversion allocates on the heap and copies the
    /// underlying `str`. Otherwise, it will try to reuse the owned
    /// `String`'s allocation.
    ///
    /// # Examples
    ///
    /// ```rust
    /// use std::borrow::Cow;
    ///
    /// let unboxed = Cow::Borrowed("hello");
    /// let boxed: Box<str> = Box::from(unboxed);
    /// println!("{boxed}");
    /// ```
    ///
    /// ```rust
    /// # use std::borrow::Cow;
    /// let unboxed = Cow::Owned("hello".to_string());
    /// let boxed: Box<str> = Box::from(unboxed);
    /// println!("{boxed}");
    /// ```
    #[inline]
    fn from(cow: Cow<'_, str>) -> Box<str> {
        match cow {
            Cow::Borrowed(s) => Box::from(s),
            Cow::Owned(s) => Box::from(s),
        }
    }
}

#[stable(feature = "boxed_str_conv", since = "1.19.0")]
impl<A: Allocator> From<Box<str, A>> for Box<[u8], A> {
    /// Converts a `Box<str>` into a `Box<[u8]>`
    ///
    /// This conversion does not allocate on the heap and happens in place.
    ///
    /// # Examples
    /// ```rust
    /// // create a Box<str> which will be used to create a Box<[u8]>
    /// let boxed: Box<str> = Box::from("hello");
    /// let boxed_str: Box<[u8]> = Box::from(boxed);
    ///
    /// // create a &[u8] which will be used to create a Box<[u8]>
    /// let slice: &[u8] = &[104, 101, 108, 108, 111];
    /// let boxed_slice = Box::from(slice);
    ///
    /// assert_eq!(boxed_slice, boxed_str);
    /// ```
    #[inline]
    fn from(s: Box<str, A>) -> Self {
        let (raw, alloc) = Box::into_raw_with_allocator(s);
        unsafe { Box::from_raw_in(raw as *mut [u8], alloc) }
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "box_from_array", since = "1.45.0")]
impl<T, const N: usize> From<[T; N]> for Box<[T]> {
    /// Converts a `[T; N]` into a `Box<[T]>`
    ///
    /// This conversion moves the array to newly heap-allocated memory.
    ///
    /// # Examples
    ///
    /// ```rust
    /// let boxed: Box<[u8]> = Box::from([4, 2]);
    /// println!("{boxed:?}");
    /// ```
    fn from(array: [T; N]) -> Box<[T]> {
        Box::new(array)
    }
}

/// Casts a boxed slice to a boxed array.
///
/// # Safety
///
/// `boxed_slice.len()` must be exactly `N`.
unsafe fn boxed_slice_as_array_unchecked<T, A: Allocator, const N: usize>(
    boxed_slice: Box<[T], A>,
) -> Box<[T; N], A> {
    debug_assert_eq!(boxed_slice.len(), N);

    let (ptr, alloc) = Box::into_raw_with_allocator(boxed_slice);
    // SAFETY: Pointer and allocator came from an existing box,
    // and our safety condition requires that the length is exactly `N`
    unsafe { Box::from_raw_in(ptr as *mut [T; N], alloc) }
}

#[stable(feature = "boxed_slice_try_from", since = "1.43.0")]
impl<T, const N: usize> TryFrom<Box<[T]>> for Box<[T; N]> {
    type Error = Box<[T]>;

    /// Attempts to convert a `Box<[T]>` into a `Box<[T; N]>`.
    ///
    /// The conversion occurs in-place and does not require a
    /// new memory allocation.
    ///
    /// # Errors
    ///
    /// Returns the old `Box<[T]>` in the `Err` variant if
    /// `boxed_slice.len()` does not equal `N`.
    fn try_from(boxed_slice: Box<[T]>) -> Result<Self, Self::Error> {
        if boxed_slice.len() == N {
            Ok(unsafe { boxed_slice_as_array_unchecked(boxed_slice) })
        } else {
            Err(boxed_slice)
        }
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "boxed_array_try_from_vec", since = "1.66.0")]
impl<T, const N: usize> TryFrom<Vec<T>> for Box<[T; N]> {
    type Error = Vec<T>;

    /// Attempts to convert a `Vec<T>` into a `Box<[T; N]>`.
    ///
    /// Like [`Vec::into_boxed_slice`], this is in-place if `vec.capacity() == N`,
    /// but will require a reallocation otherwise.
    ///
    /// # Errors
    ///
    /// Returns the original `Vec<T>` in the `Err` variant if
    /// `boxed_slice.len()` does not equal `N`.
    ///
    /// # Examples
    ///
    /// This can be used with [`vec!`] to create an array on the heap:
    ///
    /// ```
    /// let state: Box<[f32; 100]> = vec![1.0; 100].try_into().unwrap();
    /// assert_eq!(state.len(), 100);
    /// ```
    fn try_from(vec: Vec<T>) -> Result<Self, Self::Error> {
        if vec.len() == N {
            let boxed_slice = vec.into_boxed_slice();
            Ok(unsafe { boxed_slice_as_array_unchecked(boxed_slice) })
        } else {
            Err(vec)
        }
    }
}

impl<A: Allocator> Box<dyn Any, A> {
    /// Attempt to downcast the box to a concrete type.
    ///
    /// # Examples
    ///
    /// ```
    /// use std::any::Any;
    ///
    /// fn print_if_string(value: Box<dyn Any>) {
    ///     if let Ok(string) = value.downcast::<String>() {
    ///         println!("String ({}): {}", string.len(), string);
    ///     }
    /// }
    ///
    /// let my_string = "Hello World".to_string();
    /// print_if_string(Box::new(my_string));
    /// print_if_string(Box::new(0i8));
    /// ```
    #[inline]
    #[stable(feature = "rust1", since = "1.0.0")]
    pub fn downcast<T: Any>(self) -> Result<Box<T, A>, Self> {
        if self.is::<T>() { unsafe { Ok(self.downcast_unchecked::<T>()) } } else { Err(self) }
    }

    /// Downcasts the box to a concrete type.
    ///
    /// For a safe alternative see [`downcast`].
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(downcast_unchecked)]
    ///
    /// use std::any::Any;
    ///
    /// let x: Box<dyn Any> = Box::new(1_usize);
    ///
    /// unsafe {
    ///     assert_eq!(*x.downcast_unchecked::<usize>(), 1);
    /// }
    /// ```
    ///
    /// # Safety
    ///
    /// The contained value must be of type `T`. Calling this method
    /// with the incorrect type is *undefined behavior*.
    ///
    /// [`downcast`]: Self::downcast
    #[inline]
    #[unstable(feature = "downcast_unchecked", issue = "90850")]
    pub unsafe fn downcast_unchecked<T: Any>(self) -> Box<T, A> {
        debug_assert!(self.is::<T>());
        unsafe {
            let (raw, alloc): (*mut dyn Any, _) = Box::into_raw_with_allocator(self);
            Box::from_raw_in(raw as *mut T, alloc)
        }
    }
}

impl<A: Allocator> Box<dyn Any + Send, A> {
    /// Attempt to downcast the box to a concrete type.
    ///
    /// # Examples
    ///
    /// ```
    /// use std::any::Any;
    ///
    /// fn print_if_string(value: Box<dyn Any + Send>) {
    ///     if let Ok(string) = value.downcast::<String>() {
    ///         println!("String ({}): {}", string.len(), string);
    ///     }
    /// }
    ///
    /// let my_string = "Hello World".to_string();
    /// print_if_string(Box::new(my_string));
    /// print_if_string(Box::new(0i8));
    /// ```
    #[inline]
    #[stable(feature = "rust1", since = "1.0.0")]
    pub fn downcast<T: Any>(self) -> Result<Box<T, A>, Self> {
        if self.is::<T>() { unsafe { Ok(self.downcast_unchecked::<T>()) } } else { Err(self) }
    }

    /// Downcasts the box to a concrete type.
    ///
    /// For a safe alternative see [`downcast`].
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(downcast_unchecked)]
    ///
    /// use std::any::Any;
    ///
    /// let x: Box<dyn Any + Send> = Box::new(1_usize);
    ///
    /// unsafe {
    ///     assert_eq!(*x.downcast_unchecked::<usize>(), 1);
    /// }
    /// ```
    ///
    /// # Safety
    ///
    /// The contained value must be of type `T`. Calling this method
    /// with the incorrect type is *undefined behavior*.
    ///
    /// [`downcast`]: Self::downcast
    #[inline]
    #[unstable(feature = "downcast_unchecked", issue = "90850")]
    pub unsafe fn downcast_unchecked<T: Any>(self) -> Box<T, A> {
        debug_assert!(self.is::<T>());
        unsafe {
            let (raw, alloc): (*mut (dyn Any + Send), _) = Box::into_raw_with_allocator(self);
            Box::from_raw_in(raw as *mut T, alloc)
        }
    }
}

impl<A: Allocator> Box<dyn Any + Send + Sync, A> {
    /// Attempt to downcast the box to a concrete type.
    ///
    /// # Examples
    ///
    /// ```
    /// use std::any::Any;
    ///
    /// fn print_if_string(value: Box<dyn Any + Send + Sync>) {
    ///     if let Ok(string) = value.downcast::<String>() {
    ///         println!("String ({}): {}", string.len(), string);
    ///     }
    /// }
    ///
    /// let my_string = "Hello World".to_string();
    /// print_if_string(Box::new(my_string));
    /// print_if_string(Box::new(0i8));
    /// ```
    #[inline]
    #[stable(feature = "box_send_sync_any_downcast", since = "1.51.0")]
    pub fn downcast<T: Any>(self) -> Result<Box<T, A>, Self> {
        if self.is::<T>() { unsafe { Ok(self.downcast_unchecked::<T>()) } } else { Err(self) }
    }

    /// Downcasts the box to a concrete type.
    ///
    /// For a safe alternative see [`downcast`].
    ///
    /// # Examples
    ///
    /// ```
    /// #![feature(downcast_unchecked)]
    ///
    /// use std::any::Any;
    ///
    /// let x: Box<dyn Any + Send + Sync> = Box::new(1_usize);
    ///
    /// unsafe {
    ///     assert_eq!(*x.downcast_unchecked::<usize>(), 1);
    /// }
    /// ```
    ///
    /// # Safety
    ///
    /// The contained value must be of type `T`. Calling this method
    /// with the incorrect type is *undefined behavior*.
    ///
    /// [`downcast`]: Self::downcast
    #[inline]
    #[unstable(feature = "downcast_unchecked", issue = "90850")]
    pub unsafe fn downcast_unchecked<T: Any>(self) -> Box<T, A> {
        debug_assert!(self.is::<T>());
        unsafe {
            let (raw, alloc): (*mut (dyn Any + Send + Sync), _) =
                Box::into_raw_with_allocator(self);
            Box::from_raw_in(raw as *mut T, alloc)
        }
    }
}

#[stable(feature = "rust1", since = "1.0.0")]
impl<T: fmt::Display + ?Sized, A: Allocator> fmt::Display for Box<T, A> {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        fmt::Display::fmt(&**self, f)
    }
}

#[stable(feature = "rust1", since = "1.0.0")]
impl<T: fmt::Debug + ?Sized, A: Allocator> fmt::Debug for Box<T, A> {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        fmt::Debug::fmt(&**self, f)
    }
}

#[stable(feature = "rust1", since = "1.0.0")]
impl<T: ?Sized, A: Allocator> fmt::Pointer for Box<T, A> {
    fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
        // It's not possible to extract the inner Uniq directly from the Box,
        // instead we cast it to a *const which aliases the Unique
        let ptr: *const T = &**self;
        fmt::Pointer::fmt(&ptr, f)
    }
}

#[stable(feature = "rust1", since = "1.0.0")]
impl<T: ?Sized, A: Allocator> Deref for Box<T, A> {
    type Target = T;

    fn deref(&self) -> &T {
        &**self
    }
}

#[stable(feature = "rust1", since = "1.0.0")]
impl<T: ?Sized, A: Allocator> DerefMut for Box<T, A> {
    fn deref_mut(&mut self) -> &mut T {
        &mut **self
    }
}

#[unstable(feature = "deref_pure_trait", issue = "87121")]
unsafe impl<T: ?Sized, A: Allocator> DerefPure for Box<T, A> {}

#[unstable(feature = "receiver_trait", issue = "none")]
impl<T: ?Sized, A: Allocator> Receiver for Box<T, A> {}

#[stable(feature = "rust1", since = "1.0.0")]
impl<I: Iterator + ?Sized, A: Allocator> Iterator for Box<I, A> {
    type Item = I::Item;
    fn next(&mut self) -> Option<I::Item> {
        (**self).next()
    }
    fn size_hint(&self) -> (usize, Option<usize>) {
        (**self).size_hint()
    }
    fn nth(&mut self, n: usize) -> Option<I::Item> {
        (**self).nth(n)
    }
    fn last(self) -> Option<I::Item> {
        BoxIter::last(self)
    }
}

trait BoxIter {
    type Item;
    fn last(self) -> Option<Self::Item>;
}

impl<I: Iterator + ?Sized, A: Allocator> BoxIter for Box<I, A> {
    type Item = I::Item;
    default fn last(self) -> Option<I::Item> {
        #[inline]
        fn some<T>(_: Option<T>, x: T) -> Option<T> {
            Some(x)
        }

        self.fold(None, some)
    }
}

/// Specialization for sized `I`s that uses `I`s implementation of `last()`
/// instead of the default.
#[stable(feature = "rust1", since = "1.0.0")]
impl<I: Iterator, A: Allocator> BoxIter for Box<I, A> {
    fn last(self) -> Option<I::Item> {
        (*self).last()
    }
}

#[stable(feature = "rust1", since = "1.0.0")]
impl<I: DoubleEndedIterator + ?Sized, A: Allocator> DoubleEndedIterator for Box<I, A> {
    fn next_back(&mut self) -> Option<I::Item> {
        (**self).next_back()
    }
    fn nth_back(&mut self, n: usize) -> Option<I::Item> {
        (**self).nth_back(n)
    }
}
#[stable(feature = "rust1", since = "1.0.0")]
impl<I: ExactSizeIterator + ?Sized, A: Allocator> ExactSizeIterator for Box<I, A> {
    fn len(&self) -> usize {
        (**self).len()
    }
    fn is_empty(&self) -> bool {
        (**self).is_empty()
    }
}

#[stable(feature = "fused", since = "1.26.0")]
impl<I: FusedIterator + ?Sized, A: Allocator> FusedIterator for Box<I, A> {}

#[stable(feature = "boxed_closure_impls", since = "1.35.0")]
impl<Args: Tuple, F: FnOnce<Args> + ?Sized, A: Allocator> FnOnce<Args> for Box<F, A> {
    type Output = <F as FnOnce<Args>>::Output;

    extern "rust-call" fn call_once(self, args: Args) -> Self::Output {
        <F as FnOnce<Args>>::call_once(*self, args)
    }
}

#[stable(feature = "boxed_closure_impls", since = "1.35.0")]
impl<Args: Tuple, F: FnMut<Args> + ?Sized, A: Allocator> FnMut<Args> for Box<F, A> {
    extern "rust-call" fn call_mut(&mut self, args: Args) -> Self::Output {
        <F as FnMut<Args>>::call_mut(self, args)
    }
}

#[stable(feature = "boxed_closure_impls", since = "1.35.0")]
impl<Args: Tuple, F: Fn<Args> + ?Sized, A: Allocator> Fn<Args> for Box<F, A> {
    extern "rust-call" fn call(&self, args: Args) -> Self::Output {
        <F as Fn<Args>>::call(self, args)
    }
}

#[unstable(feature = "async_fn_traits", issue = "none")]
impl<Args: Tuple, F: AsyncFnOnce<Args> + ?Sized, A: Allocator> AsyncFnOnce<Args> for Box<F, A> {
    type Output = F::Output;
    type CallOnceFuture = F::CallOnceFuture;

    extern "rust-call" fn async_call_once(self, args: Args) -> Self::CallOnceFuture {
        F::async_call_once(*self, args)
    }
}

#[unstable(feature = "async_fn_traits", issue = "none")]
impl<Args: Tuple, F: AsyncFnMut<Args> + ?Sized, A: Allocator> AsyncFnMut<Args> for Box<F, A> {
    type CallRefFuture<'a> = F::CallRefFuture<'a> where Self: 'a;

    extern "rust-call" fn async_call_mut(&mut self, args: Args) -> Self::CallRefFuture<'_> {
        F::async_call_mut(self, args)
    }
}

#[unstable(feature = "async_fn_traits", issue = "none")]
impl<Args: Tuple, F: AsyncFn<Args> + ?Sized, A: Allocator> AsyncFn<Args> for Box<F, A> {
    extern "rust-call" fn async_call(&self, args: Args) -> Self::CallRefFuture<'_> {
        F::async_call(self, args)
    }
}

#[unstable(feature = "coerce_unsized", issue = "18598")]
impl<T: ?Sized + Unsize<U>, U: ?Sized, A: Allocator> CoerceUnsized<Box<U, A>> for Box<T, A> {}

// It is quite crucial that we only allow the `Global` allocator here.
// Handling arbitrary custom allocators (which can affect the `Box` layout heavily!)
// would need a lot of codegen and interpreter adjustments.
#[unstable(feature = "dispatch_from_dyn", issue = "none")]
impl<T: ?Sized + Unsize<U>, U: ?Sized> DispatchFromDyn<Box<U>> for Box<T, Global> {}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "boxed_slice_from_iter", since = "1.32.0")]
impl<I> FromIterator<I> for Box<[I]> {
    fn from_iter<T: IntoIterator<Item = I>>(iter: T) -> Self {
        iter.into_iter().collect::<Vec<_>>().into_boxed_slice()
    }
}

/// This implementation is required to make sure that the `Box<[I]>: IntoIterator`
/// implementation doesn't overlap with `IntoIterator for T where T: Iterator` blanket.
#[stable(feature = "boxed_slice_into_iter", since = "1.80.0")]
impl<I, A: Allocator> !Iterator for Box<[I], A> {}

/// This implementation is required to make sure that the `&Box<[I]>: IntoIterator`
/// implementation doesn't overlap with `IntoIterator for T where T: Iterator` blanket.
#[stable(feature = "boxed_slice_into_iter", since = "1.80.0")]
impl<'a, I, A: Allocator> !Iterator for &'a Box<[I], A> {}

/// This implementation is required to make sure that the `&mut Box<[I]>: IntoIterator`
/// implementation doesn't overlap with `IntoIterator for T where T: Iterator` blanket.
#[stable(feature = "boxed_slice_into_iter", since = "1.80.0")]
impl<'a, I, A: Allocator> !Iterator for &'a mut Box<[I], A> {}

// Note: the `#[rustc_skip_during_method_dispatch(boxed_slice)]` on `trait IntoIterator`
// hides this implementation from explicit `.into_iter()` calls on editions < 2024,
// so those calls will still resolve to the slice implementation, by reference.
#[stable(feature = "boxed_slice_into_iter", since = "1.80.0")]
impl<I, A: Allocator> IntoIterator for Box<[I], A> {
    type IntoIter = vec::IntoIter<I, A>;
    type Item = I;
    fn into_iter(self) -> vec::IntoIter<I, A> {
        self.into_vec().into_iter()
    }
}

#[stable(feature = "boxed_slice_into_iter", since = "1.80.0")]
impl<'a, I, A: Allocator> IntoIterator for &'a Box<[I], A> {
    type IntoIter = slice::Iter<'a, I>;
    type Item = &'a I;
    fn into_iter(self) -> slice::Iter<'a, I> {
        self.iter()
    }
}

#[stable(feature = "boxed_slice_into_iter", since = "1.80.0")]
impl<'a, I, A: Allocator> IntoIterator for &'a mut Box<[I], A> {
    type IntoIter = slice::IterMut<'a, I>;
    type Item = &'a mut I;
    fn into_iter(self) -> slice::IterMut<'a, I> {
        self.iter_mut()
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "boxed_str_from_iter", since = "1.80.0")]
impl FromIterator<char> for Box<str> {
    fn from_iter<T: IntoIterator<Item = char>>(iter: T) -> Self {
        String::from_iter(iter).into_boxed_str()
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "boxed_str_from_iter", since = "1.80.0")]
impl<'a> FromIterator<&'a char> for Box<str> {
    fn from_iter<T: IntoIterator<Item = &'a char>>(iter: T) -> Self {
        String::from_iter(iter).into_boxed_str()
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "boxed_str_from_iter", since = "1.80.0")]
impl<'a> FromIterator<&'a str> for Box<str> {
    fn from_iter<T: IntoIterator<Item = &'a str>>(iter: T) -> Self {
        String::from_iter(iter).into_boxed_str()
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "boxed_str_from_iter", since = "1.80.0")]
impl FromIterator<String> for Box<str> {
    fn from_iter<T: IntoIterator<Item = String>>(iter: T) -> Self {
        String::from_iter(iter).into_boxed_str()
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "boxed_str_from_iter", since = "1.80.0")]
impl<A: Allocator> FromIterator<Box<str, A>> for Box<str> {
    fn from_iter<T: IntoIterator<Item = Box<str, A>>>(iter: T) -> Self {
        String::from_iter(iter).into_boxed_str()
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "boxed_str_from_iter", since = "1.80.0")]
impl<'a> FromIterator<Cow<'a, str>> for Box<str> {
    fn from_iter<T: IntoIterator<Item = Cow<'a, str>>>(iter: T) -> Self {
        String::from_iter(iter).into_boxed_str()
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "box_slice_clone", since = "1.3.0")]
impl<T: Clone, A: Allocator + Clone> Clone for Box<[T], A> {
    fn clone(&self) -> Self {
        let alloc = Box::allocator(self).clone();
        self.to_vec_in(alloc).into_boxed_slice()
    }

    /// Copies `source`'s contents into `self` without creating a new allocation,
    /// so long as the two are of the same length.
    ///
    /// # Examples
    ///
    /// ```
    /// let x = Box::new([5, 6, 7]);
    /// let mut y = Box::new([8, 9, 10]);
    /// let yp: *const [i32] = &*y;
    ///
    /// y.clone_from(&x);
    ///
    /// // The value is the same
    /// assert_eq!(x, y);
    ///
    /// // And no allocation occurred
    /// assert_eq!(yp, &*y);
    /// ```
    fn clone_from(&mut self, source: &Self) {
        if self.len() == source.len() {
            self.clone_from_slice(&source);
        } else {
            *self = source.clone();
        }
    }
}

#[stable(feature = "box_borrow", since = "1.1.0")]
impl<T: ?Sized, A: Allocator> borrow::Borrow<T> for Box<T, A> {
    fn borrow(&self) -> &T {
        &**self
    }
}

#[stable(feature = "box_borrow", since = "1.1.0")]
impl<T: ?Sized, A: Allocator> borrow::BorrowMut<T> for Box<T, A> {
    fn borrow_mut(&mut self) -> &mut T {
        &mut **self
    }
}

#[stable(since = "1.5.0", feature = "smart_ptr_as_ref")]
impl<T: ?Sized, A: Allocator> AsRef<T> for Box<T, A> {
    fn as_ref(&self) -> &T {
        &**self
    }
}

#[stable(since = "1.5.0", feature = "smart_ptr_as_ref")]
impl<T: ?Sized, A: Allocator> AsMut<T> for Box<T, A> {
    fn as_mut(&mut self) -> &mut T {
        &mut **self
    }
}

/* Nota bene
 *
 *  We could have chosen not to add this impl, and instead have written a
 *  function of Pin<Box<T>> to Pin<T>. Such a function would not be sound,
 *  because Box<T> implements Unpin even when T does not, as a result of
 *  this impl.
 *
 *  We chose this API instead of the alternative for a few reasons:
 *      - Logically, it is helpful to understand pinning in regard to the
 *        memory region being pointed to. For this reason none of the
 *        standard library pointer types support projecting through a pin
 *        (Box<T> is the only pointer type in std for which this would be
 *        safe.)
 *      - It is in practice very useful to have Box<T> be unconditionally
 *        Unpin because of trait objects, for which the structural auto
 *        trait functionality does not apply (e.g., Box<dyn Foo> would
 *        otherwise not be Unpin).
 *
 *  Another type with the same semantics as Box but only a conditional
 *  implementation of `Unpin` (where `T: Unpin`) would be valid/safe, and
 *  could have a method to project a Pin<T> from it.
 */
#[stable(feature = "pin", since = "1.33.0")]
impl<T: ?Sized, A: Allocator> Unpin for Box<T, A> {}

#[unstable(feature = "coroutine_trait", issue = "43122")]
impl<G: ?Sized + Coroutine<R> + Unpin, R, A: Allocator> Coroutine<R> for Box<G, A> {
    type Yield = G::Yield;
    type Return = G::Return;

    fn resume(mut self: Pin<&mut Self>, arg: R) -> CoroutineState<Self::Yield, Self::Return> {
        G::resume(Pin::new(&mut *self), arg)
    }
}

#[unstable(feature = "coroutine_trait", issue = "43122")]
impl<G: ?Sized + Coroutine<R>, R, A: Allocator> Coroutine<R> for Pin<Box<G, A>>
where
    A: 'static,
{
    type Yield = G::Yield;
    type Return = G::Return;

    fn resume(mut self: Pin<&mut Self>, arg: R) -> CoroutineState<Self::Yield, Self::Return> {
        G::resume((*self).as_mut(), arg)
    }
}

#[stable(feature = "futures_api", since = "1.36.0")]
impl<F: ?Sized + Future + Unpin, A: Allocator> Future for Box<F, A> {
    type Output = F::Output;

    fn poll(mut self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Self::Output> {
        F::poll(Pin::new(&mut *self), cx)
    }
}

#[unstable(feature = "async_iterator", issue = "79024")]
impl<S: ?Sized + AsyncIterator + Unpin> AsyncIterator for Box<S> {
    type Item = S::Item;

    fn poll_next(mut self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Option<Self::Item>> {
        Pin::new(&mut **self).poll_next(cx)
    }

    fn size_hint(&self) -> (usize, Option<usize>) {
        (**self).size_hint()
    }
}

impl dyn Error {
    #[inline]
    #[stable(feature = "error_downcast", since = "1.3.0")]
    #[rustc_allow_incoherent_impl]
    /// Attempts to downcast the box to a concrete type.
    pub fn downcast<T: Error + 'static>(self: Box<Self>) -> Result<Box<T>, Box<dyn Error>> {
        if self.is::<T>() {
            unsafe {
                let raw: *mut dyn Error = Box::into_raw(self);
                Ok(Box::from_raw(raw as *mut T))
            }
        } else {
            Err(self)
        }
    }
}

impl dyn Error + Send {
    #[inline]
    #[stable(feature = "error_downcast", since = "1.3.0")]
    #[rustc_allow_incoherent_impl]
    /// Attempts to downcast the box to a concrete type.
    pub fn downcast<T: Error + 'static>(self: Box<Self>) -> Result<Box<T>, Box<dyn Error + Send>> {
        let err: Box<dyn Error> = self;
        <dyn Error>::downcast(err).map_err(|s| unsafe {
            // Reapply the `Send` marker.
            mem::transmute::<Box<dyn Error>, Box<dyn Error + Send>>(s)
        })
    }
}

impl dyn Error + Send + Sync {
    #[inline]
    #[stable(feature = "error_downcast", since = "1.3.0")]
    #[rustc_allow_incoherent_impl]
    /// Attempts to downcast the box to a concrete type.
    pub fn downcast<T: Error + 'static>(self: Box<Self>) -> Result<Box<T>, Box<Self>> {
        let err: Box<dyn Error> = self;
        <dyn Error>::downcast(err).map_err(|s| unsafe {
            // Reapply the `Send + Sync` markers.
            mem::transmute::<Box<dyn Error>, Box<dyn Error + Send + Sync>>(s)
        })
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "rust1", since = "1.0.0")]
impl<'a, E: Error + 'a> From<E> for Box<dyn Error + 'a> {
    /// Converts a type of [`Error`] into a box of dyn [`Error`].
    ///
    /// # Examples
    ///
    /// ```
    /// use std::error::Error;
    /// use std::fmt;
    /// use std::mem;
    ///
    /// #[derive(Debug)]
    /// struct AnError;
    ///
    /// impl fmt::Display for AnError {
    ///     fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
    ///         write!(f, "An error")
    ///     }
    /// }
    ///
    /// impl Error for AnError {}
    ///
    /// let an_error = AnError;
    /// assert!(0 == mem::size_of_val(&an_error));
    /// let a_boxed_error = Box::<dyn Error>::from(an_error);
    /// assert!(mem::size_of::<Box<dyn Error>>() == mem::size_of_val(&a_boxed_error))
    /// ```
    fn from(err: E) -> Box<dyn Error + 'a> {
        Box::new(err)
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "rust1", since = "1.0.0")]
impl<'a, E: Error + Send + Sync + 'a> From<E> for Box<dyn Error + Send + Sync + 'a> {
    /// Converts a type of [`Error`] + [`Send`] + [`Sync`] into a box of
    /// dyn [`Error`] + [`Send`] + [`Sync`].
    ///
    /// # Examples
    ///
    /// ```
    /// use std::error::Error;
    /// use std::fmt;
    /// use std::mem;
    ///
    /// #[derive(Debug)]
    /// struct AnError;
    ///
    /// impl fmt::Display for AnError {
    ///     fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
    ///         write!(f, "An error")
    ///     }
    /// }
    ///
    /// impl Error for AnError {}
    ///
    /// unsafe impl Send for AnError {}
    ///
    /// unsafe impl Sync for AnError {}
    ///
    /// let an_error = AnError;
    /// assert!(0 == mem::size_of_val(&an_error));
    /// let a_boxed_error = Box::<dyn Error + Send + Sync>::from(an_error);
    /// assert!(
    ///     mem::size_of::<Box<dyn Error + Send + Sync>>() == mem::size_of_val(&a_boxed_error))
    /// ```
    fn from(err: E) -> Box<dyn Error + Send + Sync + 'a> {
        Box::new(err)
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "rust1", since = "1.0.0")]
impl<'a> From<String> for Box<dyn Error + Send + Sync + 'a> {
    /// Converts a [`String`] into a box of dyn [`Error`] + [`Send`] + [`Sync`].
    ///
    /// # Examples
    ///
    /// ```
    /// use std::error::Error;
    /// use std::mem;
    ///
    /// let a_string_error = "a string error".to_string();
    /// let a_boxed_error = Box::<dyn Error + Send + Sync>::from(a_string_error);
    /// assert!(
    ///     mem::size_of::<Box<dyn Error + Send + Sync>>() == mem::size_of_val(&a_boxed_error))
    /// ```
    #[inline]
    fn from(err: String) -> Box<dyn Error + Send + Sync + 'a> {
        struct StringError(String);

        impl Error for StringError {
            #[allow(deprecated)]
            fn description(&self) -> &str {
                &self.0
            }
        }

        impl fmt::Display for StringError {
            fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
                fmt::Display::fmt(&self.0, f)
            }
        }

        // Purposefully skip printing "StringError(..)"
        impl fmt::Debug for StringError {
            fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
                fmt::Debug::fmt(&self.0, f)
            }
        }

        Box::new(StringError(err))
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "string_box_error", since = "1.6.0")]
impl<'a> From<String> for Box<dyn Error + 'a> {
    /// Converts a [`String`] into a box of dyn [`Error`].
    ///
    /// # Examples
    ///
    /// ```
    /// use std::error::Error;
    /// use std::mem;
    ///
    /// let a_string_error = "a string error".to_string();
    /// let a_boxed_error = Box::<dyn Error>::from(a_string_error);
    /// assert!(mem::size_of::<Box<dyn Error>>() == mem::size_of_val(&a_boxed_error))
    /// ```
    fn from(str_err: String) -> Box<dyn Error + 'a> {
        let err1: Box<dyn Error + Send + Sync> = From::from(str_err);
        let err2: Box<dyn Error> = err1;
        err2
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "rust1", since = "1.0.0")]
impl<'a> From<&str> for Box<dyn Error + Send + Sync + 'a> {
    /// Converts a [`str`] into a box of dyn [`Error`] + [`Send`] + [`Sync`].
    ///
    /// [`str`]: prim@str
    ///
    /// # Examples
    ///
    /// ```
    /// use std::error::Error;
    /// use std::mem;
    ///
    /// let a_str_error = "a str error";
    /// let a_boxed_error = Box::<dyn Error + Send + Sync>::from(a_str_error);
    /// assert!(
    ///     mem::size_of::<Box<dyn Error + Send + Sync>>() == mem::size_of_val(&a_boxed_error))
    /// ```
    #[inline]
    fn from(err: &str) -> Box<dyn Error + Send + Sync + 'a> {
        From::from(String::from(err))
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "string_box_error", since = "1.6.0")]
impl<'a> From<&str> for Box<dyn Error + 'a> {
    /// Converts a [`str`] into a box of dyn [`Error`].
    ///
    /// [`str`]: prim@str
    ///
    /// # Examples
    ///
    /// ```
    /// use std::error::Error;
    /// use std::mem;
    ///
    /// let a_str_error = "a str error";
    /// let a_boxed_error = Box::<dyn Error>::from(a_str_error);
    /// assert!(mem::size_of::<Box<dyn Error>>() == mem::size_of_val(&a_boxed_error))
    /// ```
    fn from(err: &str) -> Box<dyn Error + 'a> {
        From::from(String::from(err))
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "cow_box_error", since = "1.22.0")]
impl<'a, 'b> From<Cow<'b, str>> for Box<dyn Error + Send + Sync + 'a> {
    /// Converts a [`Cow`] into a box of dyn [`Error`] + [`Send`] + [`Sync`].
    ///
    /// # Examples
    ///
    /// ```
    /// use std::error::Error;
    /// use std::mem;
    /// use std::borrow::Cow;
    ///
    /// let a_cow_str_error = Cow::from("a str error");
    /// let a_boxed_error = Box::<dyn Error + Send + Sync>::from(a_cow_str_error);
    /// assert!(
    ///     mem::size_of::<Box<dyn Error + Send + Sync>>() == mem::size_of_val(&a_boxed_error))
    /// ```
    fn from(err: Cow<'b, str>) -> Box<dyn Error + Send + Sync + 'a> {
        From::from(String::from(err))
    }
}

#[cfg(not(no_global_oom_handling))]
#[stable(feature = "cow_box_error", since = "1.22.0")]
impl<'a, 'b> From<Cow<'b, str>> for Box<dyn Error + 'a> {
    /// Converts a [`Cow`] into a box of dyn [`Error`].
    ///
    /// # Examples
    ///
    /// ```
    /// use std::error::Error;
    /// use std::mem;
    /// use std::borrow::Cow;
    ///
    /// let a_cow_str_error = Cow::from("a str error");
    /// let a_boxed_error = Box::<dyn Error>::from(a_cow_str_error);
    /// assert!(mem::size_of::<Box<dyn Error>>() == mem::size_of_val(&a_boxed_error))
    /// ```
    fn from(err: Cow<'b, str>) -> Box<dyn Error + 'a> {
        From::from(String::from(err))
    }
}

#[stable(feature = "box_error", since = "1.8.0")]
impl<T: core::error::Error> core::error::Error for Box<T> {
    #[allow(deprecated, deprecated_in_future)]
    fn description(&self) -> &str {
        core::error::Error::description(&**self)
    }

    #[allow(deprecated)]
    fn cause(&self) -> Option<&dyn core::error::Error> {
        core::error::Error::cause(&**self)
    }

    fn source(&self) -> Option<&(dyn core::error::Error + 'static)> {
        core::error::Error::source(&**self)
    }

    fn provide<'b>(&'b self, request: &mut core::error::Request<'b>) {
        core::error::Error::provide(&**self, request);
    }
}
